Clean the condenser coil at least every three months (monthly near fryers and griddles), inspect door gaskets at every cleaning, clean drain pans monthly, keep the evaporator area clear and log temperatures daily. Most emergency calls we get from restaurants start with a dirty condenser or a frozen evaporator.
Commercial refrigeration maintenance tasks
Pick a task to see the full guide: what the part does, what happens when it’s neglected, step-by-step instructions, brand notes and photos from our service calls.
What skipping commercial refrigeration maintenance leads to
In a commercial kitchen, a dirty coil or a torn gasket costs product, energy and inspection points.
Maintenance checklist
| Task | How often |
|---|---|
| Log cabinet temperatures | Daily (each shift in busy kitchens) |
| Wipe up spills and check for moisture, especially walk-in floors | Weekly or more |
| Clean interior and shelving | Weekly or every two weeks |
| Inspect and clean door gaskets | At every cleaning |
| Clean drain pans | Monthly |
| Clean the condenser coil | Every 3 months; monthly in greasy kitchens |
| Check drain tubing for buildup | Every couple of months |
1. Condenser coil
Most manufacturers call for cleaning the condenser about every three months. Kitchens with fryers, griddles or flour in the air clog coils faster. Disconnect power, brush the coil, then vacuum or blow out the rest, and degrease if your manual allows it.
2. Gaskets and doors
Split gaskets and doors propped open during service let warm, humid air in, which ices the evaporator and drives temperatures up. Replace damaged gaskets with the part matching your model and serial number.
3. Evaporator airflow and drains
Don’t block the evaporator fan with boxes or load hot food directly into a reach-in. Clean drain pans monthly and check drain tubing so defrost water doesn’t back up and freeze.
4. Temperature logs
A daily log shows a slow rise long before product is lost. Condensation, constant running, frost buildup or a cabinet that won’t hold temperature are the signs to call.
What we find on commercial calls
On commercial refrigeration calls we regularly see sealed-system failures after long periods of overheating, such as an Atosa unit in Commerce City and a TRUE refrigerator in Golden that both needed sealed-system repairs, and iced evaporators caused by blocked airflow or failed defrost.
Frequently asked questions
How often should commercial refrigerator coils be cleaned?
About every three months, and monthly in kitchens with grease or flour in the air.
Why is my walk-in icing up?
Usually a door gasket or door left open, a defrost problem or a blocked drain line.
What should a reach-in cooler hold?
Food code generally requires cold-held food at 41°F or below; check your local health department rules.
Need scheduled service for your business? Call 720-230-1229. See also our commercial preventive maintenance program.


