Oven Not Heating? Causes and Fixes

Updated November 2026 · By Zach, EPA 608-certified appliance technician, The Appliance Team, Denver CO

Quick answer

An electric oven that will not heat usually has a burned-out bake element, a tripped breaker, or a failed temperature sensor or control. A gas oven that will not heat most often has a weak bake igniter that glows but cannot open the gas safety valve. Settings like control lock, delay start, or demo mode can also stop heating.

Electric and gas ovens heat in different ways, so start by knowing which you have. Some causes are simple settings. Others involve electrical or gas parts that should be handled by a technician.

Common causes and how to fix them

1. Burned-out bake element (electric) Technician

Signs: Element does not glow red; you may see a break, blister, or burn mark on it. Broil may still work.

Fix: A technician tests and replaces the element.

2. Weak or failed bake igniter (gas) Technician

Signs: Igniter glows but the burner does not light, or takes several minutes to light.

Fix: Replace the igniter. A weak igniter may still glow but not draw enough current to open the gas valve.

3. Tripped breaker or partial power loss (electric) DIY check

Signs: Clock and lights work but oven will not heat. Electric ranges need both legs of a 240-volt circuit to heat.

Fix: Reset the range breaker at the panel. If it trips again, call a pro.

4. Control lock, delay start, or demo mode DIY check

Signs: Display works and the oven seems to run, but no heat.

Fix: Check the owner's manual for how to turn off control lock, delay start, Sabbath, or demo/showroom mode.

5. Faulty temperature sensor Technician

Signs: Oven heats poorly or not at all, often with an error code.

Fix: A technician tests the sensor resistance and replaces it.

6. Failed gas safety valve or no gas supply (gas) Technician

Signs: Igniter works properly but no flame; cooktop burners may also not light.

Fix: Confirm the range shutoff valve is open. Valve and gas line work is for a technician only.

7. Control board or relay failure Technician

Signs: No heat in any mode, or erratic heating, with power present.

Fix: A technician diagnoses the board and relays.

8. Blown thermal fuse or stuck self-clean lock Technician

Signs: Oven dead after a self-clean cycle, or door stays locked.

Fix: A technician checks the thermal fuse and door lock assembly.

Video: why an oven won’t heat

Video by RepairClinic.com

What we see on Denver calls

  • Since 2024 we have been called out for an oven that won’t heat 53 times across the Denver metro and Boulder County. The most common findings on those calls: bake or broil element (5 calls), igniter (4) and wiring (2).
  • Every number here comes from our own job records, not from the video.
  • If the checks shown in the video don’t solve it, these are the first things our technicians test.

Don’t want to do it yourself? Call 720-230-1229.

What actually caused it on our service calls

The causes above are the general list. This section shows what our technicians found on real jobs. Since 2024 we have been called out for an oven that won’t heat 53 times across the Denver metro and Boulder County. Every number below comes from our own job records.

What we found most often

  1. Bake or broil element: 5 calls
  2. Igniter: 4 calls
  3. Wiring: 2 calls
  4. Control board: 2 calls
  5. Surface element or burner switch: 2 calls

Brands we saw with this problem

LG (4), Frigidaire (4), Whirlpool (4), Samsung (4), Maytag (3), GE (3). This counts our calls only; it is not a reliability ranking.

Recent calls

  • Broomfield (80020), September 2026: Oven not heating. Diagnosis: wiring.
  • Golden (80403), September 2026: Oven not heating. Repair: bake or broil element replaced (WPY04100021).
  • Denver (80219), June 2026: Frigidaire oven not heating. Repair: igniter replaced.
  • Parker (80134), May 2026: Whirlpool oven not heating. Repair: bake or broil element replaced (W11182108).

Oven repairs from $290. Home diagnostic visit from $59, credited toward your repair. Call 720-230-1229.

Source: The Appliance Team service records, 2024–2026. Customer details removed.

Brand by brand: what we find inside

We went back through our job notes, through October 2026, and pulled every call for this problem where the brand was written down. Technician notes are short, so the part counts below are minimums: the real numbers are higher. Part numbers are the ones our technicians actually installed or ordered on these calls.

Samsung 9 calls

A Samsung oven in Boulder would not heat above 175°F; the control board (DG92-01084A) was replaced. Other calls: a bake element with a temperature sensor in Thornton, a convection element with a relay board in Lafayette, and bake igniters on gas models in Wheat Ridge.

Parts on our tickets: DG92-01084A board, DG47-00038B bake element, DG32-00002B sensor, DG47-00009A convection element.

Samsung oven repair · Samsung oven codes

Whirlpool 9 calls

Whirlpool: a bake igniter in Longmont, a heating element (W11182108) in Parker, and a loose power connection repaired in Denver.

Parts on our tickets: W11182108 element, bake igniters.

Whirlpool oven repair · Whirlpool oven codes

GE 8 calls

GE: bake igniters (WB2X9154 in Frederick) and a control board (WB27T10651) in Golden where no element heated in bake or broil. In Erie the first fix was simply turning the gas supply valve back on behind the range. In Lakewood the door lock switch only needed cleaning: a lock stuck from self-clean can stop the oven from baking.

Parts on our tickets: WB2X9154 igniter, WB27T10651 control board.

GE oven repair · GE oven codes

Frigidaire 6 calls

Frigidaire gas ovens: igniters lead. In Denver two igniters were replaced, and in Lakewood the bake burner only needed cleaning.

Parts on our tickets: oven igniters.

Frigidaire oven repair

LG

LG: a control board (EBR74164810) in Lochbuie and two oven igniters, top and bottom, in Arvada.

Parts on our tickets: EBR74164810 control board, igniters.

LG oven repair

KitchenAid

KitchenAid: element connectors repaired in Centennial and a control board (W10759299) in Boulder.

Parts on our tickets: W10759299 control board.

KitchenAid oven repair

Thermador

Thermador: in Wheat Ridge both ovens stopped heating with an E118 code after a few minutes. Both cooling fans were running; a new control board (12022214) fixed it. In Denver the top oven was pulled out to replace its heating element.

Parts on our tickets: 12022214 control board, heating element.

Thermador oven repair

Viking

Viking: a thermostat (PJ030035) in Golden and a temperature sensor (PE050206) in Longmont.

Parts on our tickets: PJ030035 thermostat, PE050206 sensor.

Viking oven repair

Maytag

Maytag: a bake element (W10779716) in Arvada.

Parts on our tickets: W10779716 bake element.

Maytag oven repair

JennAir

JennAir: a control board (8507P346-60) in Arvada.

Parts on our tickets: 8507P346-60 control board.

JennAir oven repair

Electrolux

Electrolux: a bake igniter in Boulder.

Parts on our tickets: bake igniter.

Electrolux oven repair

What you can safely check yourself

  1. Make sure the oven is set to Bake with a temperature, and that delay start, control lock, and demo mode are off.
  2. Check the breaker panel and reset a tripped range breaker once.
  3. For gas ovens, confirm the cooktop burners light. If they do not, the gas supply may be off.
  4. Look through the window or open the drawer area to see whether the gas igniter glows or the electric element turns red.
  5. Turn off power at the breaker and let the oven cool fully before looking closely at an electric element.
  6. Note any error code shown on the display.

When to call a technician

  • You smell gas. Leave the home and call your gas utility or 911 from outside.
  • The bake element is visibly broken or blistered.
  • The gas igniter glows but the oven does not light within about 90 seconds.
  • The breaker trips repeatedly or you see sparks or scorch marks.

How to prevent this

Many of these breakdowns start with maintenance that was skipped. These guides show what to check, how often, and what happens if you don't:

All appliance maintenance guides →

Frequently asked questions

Why does my oven broil but not bake?

In an electric oven, that usually means the bake element has failed while the broil element still works. In a gas oven, the bake igniter is the most likely part.

How long should a gas oven igniter glow before lighting?

Many hot-surface igniters glow for 30 to 90 seconds before the burner lights. If it glows longer without lighting, the igniter is likely weak.

Can I replace an oven element myself?

It is possible on some models, but it involves the oven's power wiring. Shut off the breaker first, or have a technician do it to make sure the real cause is found.

Why did my oven stop working after self-clean?

Self-clean runs very hot and can blow a thermal fuse or damage a sensor, control, or door lock. A technician can test those parts.

720-230-1229
720-230-1229
Call Now Book Online