Clean the lint screen every load, wash it every few months, have the vent duct cleaned at least once a year, use rigid or semi-rigid metal duct, and keep the outside vent hood clear. Most dryer problems we fix are made worse by poor airflow.
Dryer maintenance tasks
Pick a task to see the full guide: what the part does, what happens when it’s neglected, step-by-step instructions, brand notes and photos from our service calls.
What skipping dryer maintenance leads to
Lint is the root of most dryer problems, from long dry times to blown fuses to fires.
Maintenance schedule
| Task | How often |
|---|---|
| Clean the lint screen | Every load |
| Wash the lint screen with soapy water | Every few months |
| Check the outside vent hood opens and blows strongly | Monthly, and after snow |
| Clean the vent duct | At least once a year |
| Vacuum the lint screen housing and behind the dryer | Every few months |
Why it matters
The U.S. Fire Administration estimated about 2,900 residential clothes dryer fires a year, and the leading factor contributing to ignition was failure to clean (34%). The NFPA recommends cleaning the lint screen every load and the vent at least once a year, and the CPSC recommends rigid or semi-rigid metal duct. Details in our dryer vent and fire safety guide.
1. Lint screen
Clean it before or after every load. Dryer sheets leave a film that blocks the mesh, so wash it with warm soapy water every few months; water should pass through it freely. Replace a torn screen.
2. Vent duct
Replace foil or plastic accordion duct with rigid or semi-rigid metal, keep runs short and avoid crushing the duct behind the dryer. Professional vent cleaning reaches the full run to the outside.
3. Signs of restricted airflow
- Clothes need two cycles to dry.
- The top of the dryer or the laundry room gets very hot.
- The outside flap barely opens.
- A burning smell, or the dryer stops mid-cycle.
What we find when maintenance is skipped
Across 983 dryer calls in our records since 2023, the heating element was the most replaced part (88 calls), followed by belts (35), drum rollers or idler pulleys (33) and clogged vents or lint (29). Restricted airflow overheats elements and blows thermal fuses, so many of these trace back to the vent.
Need the vent cleaned? See our dryer vent cleaning service.
Frequently asked questions
How often should a dryer vent be cleaned?
At least once a year, per the NFPA, and sooner if drying takes longer than usual.
Should I clean the lint screen every load?
Yes. It is the single most effective dryer maintenance step.
Is foil dryer duct safe?
The CPSC recommends rigid or semi-rigid metal duct instead of foil or plastic accordion duct.
Want a technician to do it? Call 720-230-1229. We serve Denver, Boulder County and 52 surrounding cities.



