Dishwasher Maintenance: Filter, Spray Arms, Rinse Aid and Drain

Updated November 2026 · By Zach, EPA 608-certified appliance technician, The Appliance Team, Denver CO

Quick answer

Clean the filter about once a month (every two weeks if you run it daily), check the spray arms for clogged holes, keep rinse aid filled, run a cleaning cycle monthly, and run the kitchen tap hot before starting a load. In hard-water areas, do all of this more often.

Dishwasher maintenance tasks

Pick a task to see the full guide: what the part does, what happens when it’s neglected, step-by-step instructions, brand notes and photos from our service calls.

Maintenance schedule

Task How often
Clean the filter Monthly; every 2 weeks with daily use
Refill rinse aid When the indicator comes on
Run a cleaning cycle with dishwasher cleaner Monthly
Check spray arm holes and that arms spin Every 1 to 3 months
Wipe the door gasket and edges Monthly
Check the drain hose and air gap Yearly, or if water stands

1. Clean the filter

Whirlpool’s guideline is to clean the filter once a month, and every two weeks for large households or daily use. Twist out the filter at the bottom of the tub, rinse it under hot water and scrub with a soft brush. Never run the dishwasher without it.

2. Spray arms

Hard-water scale and food bits block the small holes. Remove the arms, clear holes with a toothpick and rinse. After reinstalling, make sure they spin freely.

3. Rinse aid, detergent and hot water

Rinse aid helps drying and reduces spots, especially with Denver-area hard water. Use dishwasher detergent only; hand dish soap makes foam that leaks out the door. Running the kitchen tap until it is hot helps the first fill start hot.

4. Drain hose and air gap

Standing water usually starts with a clogged filter, then the drain hose, the air gap or a new garbage disposal with the knockout plug still in. Check them before calling.

What we find when maintenance is skipped

Across 702 dishwasher calls in our records since 2023, the most common repairs were the circulation pump or wash motor (51 calls), the control board (35) and the drain pump (34). A clogged filter makes both pumps work harder. See dishwasher not draining and dishwasher leaking from the bottom.

Frequently asked questions

How often should I clean the dishwasher filter?

About once a month, or every two weeks with daily use, per Whirlpool.

Do I need rinse aid?

It noticeably improves drying and reduces spots, especially in hard water.

Why does my dishwasher smell?

Usually a dirty filter or food trapped in the sump. Clean the filter and run a cleaning cycle.

Want a technician to do it? Call 720-230-1229. We serve Denver, Boulder County and 52 surrounding cities.

720-230-1229
720-230-1229
Call Now Book Online