Maytag Dryer Making Noise? Lessons From 350+ Repairs

Updated November 2026 · By Zach, EPA 608-certified appliance technician, The Appliance Team, Denver CO

Quick answer

A noisy Maytag dryer almost always needs a repair kit: the drum rollers or support wheels, the idler pulley and the belt. If it hums and will not turn, the drive motor is the suspect; a loud rattle can be the blower wheel or a loose drum baffle. We have repaired more than 350 noisy Maytag dryers. In the 31 calls with detailed notes in our current job system, the repair kit, rollers or idler were replaced in 13, the motor in 1, the blower wheel in 1, and in Erie a loose baffle was fixed without parts.

This guide is written from our own job records. We have fixed more than 350 Maytag dryers that were making noise; 31 of those calls, from 2024 to October 2026, are in our current job system with detailed notes, across Denver, Longmont, Lakewood, Westminster, Erie, Arvada, Dacono, Broomfield and the rest of the metro. The photos are from our Maytag dryer calls.

What 31 detailed Maytag calls show

What the technician noted Calls Typical part or fix
Repair kit, drum rollers or support wheels, idler pulley, belt 13 12001541 kit, 4392067 rollers, WPW10314173 wheels, W10547292 idler
Drive motor (hums, will not turn) 1 279827
Blower wheel 1 Y303836
Loose drum baffle 1 Fixed, no parts

Many notes only record the complaint, so these counts are minimums. Many of the Maytag dryers we see are 10 to 15 years old; in Longmont a Maytag 4000 bought in 2010 had started squeaking when the drum turned, and a repair kit fixed it.

Squeaking and thumping: rollers, idler and belt

Maytag dryer taken apart for a repair kit in Denver
A Maytag dryer in Denver taken apart for a repair kit, with the blower wheel and the motor visible. A kit with four drum rollers was installed.

A top-load Maytag dryer drum rides on two rear rollers and front glides or support wheels, and a belt from the motor turns it, held tight by an idler pulley. As they wear, you hear it:

  • Squeaking or screeching, often from the idler pulley or a dry roller. In Wheat Ridge a screeching Maytag needed all of its rollers and the belt.
  • Thumping as the drum turns, from a roller worn flat.
  • Metal-on-metal grinding, when a roller or the idler has worn through.
Rear drum roller with lint in a Maytag dryer in Denver
A rear drum roller with lint packed around it in the same Denver dryer. The rollers were replaced.

We replace the rollers, the idler pulley and the belt together, because they wear together. The kits and parts on our tickets include 12001541 (Lochbuie and Louisville), rollers 4392067 (Longmont and Boulder), support wheels WPW10314173 (Denver), and idler W10547292 with roller kit 8536974 (Englewood).

Lint around the motor and idler pulley of a Maytag dryer in Denver
Lint and dirt around the motor and the idler pulley of the same Denver dryer. The inside was cleaned when the kit was installed.

When a dryer is open, we clean out the lint. In Westminster a front-load Maytag got a repair kit and an internal cleaning on the same visit. One honest note from Littleton: after a new kit, the drum still beat as it turned, and the technician suspected a warped drum and told the owner.

Front-load Maytag dryers

Worn drum roller removed from a Maytag front-load dryer in Dacono
A worn drum roller removed from a Maytag front-load dryer (MED5500FC0) in Dacono that was making a loud squeal.

Front-load Maytag dryers use the same idea, rollers and an idler, but the parts are different and the dryer has to be opened from the front. A loud squeal that changes as the drum speeds up is usually a roller like the one above.

Humming, rattling and other noises

Old and new drive motor from a Maytag dryer in Louisville
The old and the new drive motor side by side on a Maytag dryer call in Louisville. A repair kit and a bearing kit were also on the parts list.
  • Humming but not turning. In Northglenn the dryer hummed and would not start; the drive motor (279827) was replaced. A broken belt can cause a similar hum, so the technician checks both.
  • A loud rattle or roar from the front or bottom. In Westminster the blower wheel (Y303836) was replaced.
  • A knock inside the drum. In Erie a drum baffle had come loose; fixing it ended the noise with no parts.
  • Noise plus no heat. In Longmont the dryer was noisy and not heating: the drum rollers and the heating element were replaced.
Belt and idler pulley of a Maytag gas dryer in Denver
The belt and the idler pulley of a Maytag gas dryer in Denver. The belt, the idler pulley, the igniter and the gas valve coils were replaced.

Video: Maytag dryer drum support rollers

Video by RepairClinic.com

What we see on Denver calls

  • The video installs drum support roller kit 12001541, the same kit on our tickets. On our 31 detailed Maytag noise calls, a repair kit, drum rollers or support wheels, idler pulley or belt was the fix in 13.
  • If the dryer hums but the drum won’t turn, the drive motor (279827) can be the cause; we saw that once.

Don’t want to do it yourself? Call 720-230-1229.

Safe checks before you call

  1. Unplug the dryer before you look inside the drum.
  2. Check the drum and the pockets for coins, buttons or a loose baffle.
  3. Turn the drum by hand. A squeak or thump that matches the noise points to the rollers or the idler.
  4. Check that the dryer is level and not touching the wall or the washer.
  5. If it hums and does not turn, stop using it: a stalled motor can overheat.
  6. Write down the model number from the label inside the door, such as MED5500FC0.

What it costs

On our price list rollers, the belt and the idler pulley start from $259 for labor, and a heating element from $179, with parts quoted separately. The home diagnostic visit is from $59 and is credited toward the repair. See our prices.

When to call a technician

  • The dryer squeaks, thumps or grinds every cycle.
  • The dryer hums but the drum does not turn.
  • You hear metal on metal or smell burning.
  • The noise came back after a repair kit was installed.

We repair Maytag dryers across 52 Denver-area cities. See Maytag dryer repair, LG dryer making noise and our general guide to dryers making noise. If the dryer is also slow to dry, see Whirlpool and Maytag dryers not heating.

How to prevent this

Many of these breakdowns start with maintenance that was skipped. These guides show what to check, how often, and what happens if you don't:

All appliance maintenance guides →

Frequently asked questions

Why is my Maytag dryer squeaking?

Usually the idler pulley or worn drum rollers. In our records a repair kit, rollers, idler and belt together, was the most common fix on noisy Maytag dryers.

Why does my Maytag dryer hum but not turn?

Often a failed drive motor or a broken belt. Stop using it until it is checked, because a stalled motor can overheat.

Should I replace just one roller?

We do not recommend it. The rollers, the idler and the belt wear together; one kit avoids a second visit.

Why is my Maytag dryer still noisy after a new repair kit?

Other causes include a worn drum bearing, a loose baffle or a warped drum. A technician can tell them apart by turning the drum with the belt off.

Is it worth fixing a noisy Maytag dryer?

Usually yes. A repair kit is a moderate repair, and Maytag dryers often run for many more years after it.

720-230-1229
720-230-1229
Call Now Book Online