Change the water filter about every six months, empty and wash the ice bin every few months, check the water line behind the refrigerator once a year, and keep the freezer at 0°F. On door ice makers, watch for ice building up in the compartment.
Ice maker maintenance tasks
Pick a task to see the full guide: what the part does, what happens when it’s neglected, step-by-step instructions, brand notes and photos from our service calls.
What skipping ice maker maintenance leads to
Most ice maker failures start with water: scale, low flow or a dirty bin.
Maintenance schedule
| Task | How often |
|---|---|
| Replace the water filter | About every 6 months |
| Empty and wash the ice bin | Every 3 months, or when ice tastes stale |
| Check freezer temperature (0°F) | Monthly |
| Inspect the water line and supply valve | Once a year |
| Check the ice door seal (door ice makers) | Every few months |
1. Replace the water filter
A clogged filter is the most common reason for small or hollow cubes. After installing a new filter, run a few gallons through the dispenser and throw out the first batches of ice, as most manuals recommend.
2. Clean the ice bin
Turn the ice maker off, remove the bin, discard the ice and wash the bin with warm water and mild soap. Rinse, dry and reinstall. Clumped ice in the bin can mean the freezer is warming and refreezing, or the valve is seeping.
3. Check the water supply
Make sure the supply valve is fully open and the line isn’t kinked. In winter, lines along exterior walls can freeze; see Colorado winter and your appliances.
4. Watch door ice makers for ice buildup
On French-door refrigerators with the ice maker in the door, cold air leaking into the fresh-food side freezes into a block. Of 87 detailed Samsung ice maker calls in our records, the ice maker housing was sealed 25 times. Ice spilling out of the compartment or a stuck ice door is the early sign.
What we find on ice maker calls
Since 2024 we have been called out for ice maker problems 372 times. The ice maker assembly itself was the top repair (64 calls), followed by the water inlet valve (17) and cooling problems. Hard water speeds up valve failure; see hard water in the Denver metro.
Frequently asked questions
How often should I change the refrigerator water filter?
About every six months, or when the filter light comes on.
Why is my ice small or hollow?
Usually not enough water reaches the mold: a clogged filter, low water pressure or a weak inlet valve. See small, hollow or slow ice.
Should I throw out the first ice after a filter change?
Yes. Most manuals recommend discarding the first batches.
Want a technician to do it? Call 720-230-1229. We serve Denver, Boulder County and 52 surrounding cities.


