Maytag Appliance Repair

Maytag in our area means laundry: 4 of every 5 Maytag jobs we have done since 2024 were washers and dryers. Noise, no heat and drain errors are the big three.

330+ Maytag repairs Laundry specialists Written price first

Maytag repair in the Denver metro, built on 330+ Maytag jobs we have completed since early 2024. If you own a Maytag, there is a good chance it lives in your laundry room: 134 of our Maytag calls were dryers and about 130 were washers. Dishwashers and refrigerators make up most of the rest.

Dryer squeal, washer drain code or dishwasher leak: our technicians fix Maytag laundry regularly, give a written price before touching anything, and back the work for 90 days. 4.9 stars on Google.

The three Maytag problems we fix most

1. Noise. It is the number-one Maytag complaint in our records, ahead of anything else. Dryers squeal, thump or tick; washers grind during spin. On dryers the culprit is usually worn drum rollers, the idler pulley or the belt. On top-load washers it is often the suspension or the drive components. 2. Dryer not heating. The second biggest group. On electric Maytag dryers the heating element is the usual failure; a Longmont dryer this year needed element 8544771. On gas models we test the igniter and gas valve coils. We always check the vent too, because a blocked vent is what kills elements in the first place. 3. Washer drain and spin errors. Maytag top-loaders show LD or F9 E1 when they cannot drain in time. Most of the time it is a blocked pump or filter. Not always: on one Erie washer the pump tested fine and the main control board was the problem. Another Erie washer with E01 F03 needed a pump and pressure switch.

Recent Maytag jobs

  • Lafayette — dishwasher left water in the tub after a cycle. Replaced the drain pump.
  • Denver — a washer that would not finish spinning and a dryer with a ticking noise, both checked on one service call.
  • Longmont — dryer running cold. New heating element, vent checked.

From our recent Maytag jobs

Maytag dishwasher showing an F9 drain code
Maytag dishwasher showing an F9 drain code
Testing a radiant element on a Maytag cooktop
Testing a radiant element on a Maytag cooktop
Element wiring under a Maytag cooktop
Element wiring under a Maytag cooktop
Maytag front-load washer on a service call
Maytag front-load washer on a service call

How much a Maytag fix runs

Rollers, belts and elements are inexpensive parts, which is why most noisy or cold dryers are minor repairs. Labor for Maytag repair starts from $179 for a minor repair, from $259 for a standard repair and from $479 for a major repair; parts are quoted separately. The service call (from $59) is waived when you go ahead with the repair. See our price list.

Why Maytag parts are easy to get

Maytag has been part of Whirlpool since 2006. Today’s Maytag dryers, top-load washers and dishwashers share many parts with Whirlpool and Amana, so belts, rollers, elements and pumps are usually in stock locally. Older Maytag Neptune and Atlantis machines are a different story; we will tell you up front if a part is discontinued.

Where we see Maytags

Longmont is our busiest Maytag city, followed by Denver, Boulder, Arvada, Littleton, Erie, Westminster, Broomfield, Lafayette and Thornton.

Before you call

For a dryer that runs cold, pull the lint screen and check that the outside vent flap opens while it runs. For a washer with a drain code, look for a kinked drain hose behind the machine. If neither helps, book a visit.

What usually breaks on a Maytag

01
Dryer squealing or thumping
02
Dryer not heating
03
Washer LD or F9 E1 long drain
04
Washer not finishing spin
05
Washer leaking
06
Dryer ticking noise
07
Dishwasher not draining
08
Dishwasher leak error
09
Washer won't start
10
Refrigerator not cooling
Maytag Appliance Repair
Brands We Service

Frequently Asked Questions

Noise is the single most common Maytag complaint we get. On these dryers it is almost always worn drum rollers, a tired idler pulley or a stretched belt. Replacing worn rollers, pulley and belt together keeps the noise from returning when the next part wears out.

LD is a long drain code. The washer could not empty in time. We check the drain hose and pump filter first. On one Erie washer the pump was fine and the main control board was at fault.

Labor for Maytag repair starts from $179 for a minor repair, from $259 for a standard repair and from $479 for a major repair; parts are quoted separately. The service call (from $59) is waived when you go ahead with the repair.

Yes, Whirlpool owns Maytag. Most current Maytag laundry uses Whirlpool parts, which is why belts, rollers and elements for them are usually easy to get locally.

Clean the filter under the lower rack first. If water still sits in the tub, the drain pump has usually failed. That was the fix on a recent Lafayette call.

Maytag washer or dryer down?

Laundry piles up fast. Book online or call and tell us whether it is noise, no heat or a code, so we come prepared.

Other Services We Offer

720-230-1229
720-230-1229
Call Now Book Online