Dryer Repair in Denver, CO

Same-day dryer repair across Denver, including Highland, Berkeley, Sloan Lake. All brands, written quote before any work.

Service call from $59, $0 with repair Same-day service 90-day parts & labor warranty
10,000+Repairs Completed
50+Brands Serviced
4.9Star Rating
SameDay Service
Dryer repair · Denver

If your dryer has stopped heating, tumbling or shutting off on time, The Appliance Team can usually get a Denver technician out the same day. We service gas and electric dryers from every major brand and put a written quote in your hands before starting. Approve the repair and the service call (from $59) is waived, with 90 days of parts and labor coverage.

Dryers in Denver have a lint problem that people in humid cities do not. The Front Range air is dry, clothes shed lint quickly, and static holds it in the drum and the vent. Add a basement laundry room in an older Highland or Berkeley home, where the vent may take a long, crooked path to the outside wall, and you have the most common reason we are called: a dryer that runs and runs but leaves clothes damp.

Why Denver Dryers Overheat, Run Long or Stop Heating

In the bungalows and Denver Squares of Highland, Berkeley, Park Hill and Washington Park, laundry usually sits in the basement. The vent has to climb out through a foundation wall or a rim joist, often with several elbows along the way. Long runs and old flexible foil duct trap lint, which raises exhaust temperature and makes the dryer cycle on its high-limit thermostat. We check vent airflow at the machine before condemning a heating element or gas valve, because a blocked vent can destroy new parts quickly.

Low humidity also means clothes dry faster than many people expect, and moisture-sensing dryers can end cycles early or run them too long when their sensor bars are coated with fabric softener film. Static and lint collect around the drum seals and blower wheel. On a typical Denver service call we clean the lint path inside the cabinet, not just the screen, and check the sensor bars and thermistor.

Gas dryers here are set up for altitude when they are installed. If the burner flame looks yellow or the dryer leaves a smell of gas, the burner may not be adjusted properly or the igniter and coils may be failing. Turn the dryer off, and leave gas connections to a qualified technician. In Central Park townhomes and downtown condos, closet dryers often vent through long concealed ducts, so we check airflow there too.

Common dryer problems we fix in Denver

01

Runs but no heat

On electric dryers, a burned-out heating element, thermal fuse or high-limit thermostat is the usual cause. On gas dryers, we test the igniter, flame sensor and gas valve coils. We always check vent airflow too, because a blocked vent often caused the failure.

02

Takes two or three cycles to dry a load

A clogged vent or a crushed duct behind the dryer is the first suspect. If the vent is clear, we look at a weak heating element, a failing cycling thermostat or a moisture sensor coated in residue.

03

Dryer shuts off after a few minutes

This usually means it is overheating and tripping a safety thermostat, or a motor is failing under load. We measure exhaust temperature and test the motor and thermal parts.

04

Squealing, thumping or a rumbling drum

A worn drive belt, idler pulley or drum rollers make these sounds. A flat spot on a belt causes thumping. These are routine parts replacements.

05

Drum won't turn but the dryer hums

A broken belt, a seized idler pulley or a failed drive motor stops the drum. We check the belt switch and motor and quote the repair.

06

Burning smell or a cabinet that is very hot to the touch

Stop using the dryer and let it cool. Lint packed around the heater housing or blower, or a blocked vent, is the usual cause, and a cycling thermostat stuck closed can also let it run too hot. We clean the lint path inside the cabinet and test the thermostats before it goes back into service.

Before you call: safe checks

  1. Clean the lint screen and look into the slot it sits in, where lint often packs below the screen in Denver's dry air.
  2. Pull the dryer out a few inches and make sure the transition duct behind it is not crushed or kinked against the wall.
  3. Step outside while the dryer runs and confirm the exterior vent flap opens and you can feel strong airflow.
  4. For an electric dryer that tumbles but stays cold, check the breaker panel, since a 240-volt dryer can lose half its circuit and still spin.

Recent dryer repairs in Denver

From our job records: 190 dryer repairs completed in Denver since January 2024.

What we fix most on dryers in Denver

We counted 37 dryer repair jobs in Denver in our job records. This is what those jobs needed and which brands they were, so you can see what is likely wrong with yours before we arrive.

Brands we repaired most: Whirlpool (6), Samsung (6), Maytag (3), Kenmore (3), LG (3), GE (1).

  • Drum rollers — 12 jobs. Squeaking and thumping comes from worn support rollers.
  • Drive belt — 12 jobs. A broken belt means the motor runs but the drum doesn't turn.
  • Idler pulley — 8 jobs. A screeching idler wears the belt out fast.
  • Vent and lint cleaning — 6 jobs. Clogged vents cause long dry times, blown fuses and burned elements.
  • Heating element — 4 jobs. The most common reason an electric dryer runs but stays cold.
  • Thermostats and thermistor — 3 jobs. They keep the dryer from overheating; a failed one causes no heat or overheating.
Dryer repair in Denver, CO - photo from a real job by The Appliance Team
Dryer repair in Denver
Dryer repair in Denver, CO - photo from a real job by The Appliance Team
Dryer repair in Denver
Dryer repair in Cherry Creek, CO - photo from a real job by The Appliance Team
Dryer repair in nearby Cherry Creek
Dryer repair in Aurora, CO - photo from a real job by The Appliance Team
Dryer repair in nearby Aurora
Dryer repair in Aurora, CO - photo from a real job by The Appliance Team
Dryer repair in nearby Aurora
Dryer repair in Aurora: photo from one of our jobs
Dryer repair in nearby Aurora
October 2026ZIP 80222

dryer

Thoroughly cleaned the internal airflow path.

Repaired · 90-day warranty
October 2026ZIP 80231

Electrolux dryer

Replaced the high-limit thermostat and cleaned the interior and vent duct hose.

Repaired · 90-day warranty
November 2026

dryer

Heating element and thermostat replacement

Repaired · 90-day warranty
November 2026

Whirlpool dryer

Dryer repair kit replacement, internal cleaning

Repaired · 90-day warranty
November 2026

dryer

Support wheels replacement, pulley wheel replacement, internal cleaning, leveling

Repaired · 90-day warranty
October 2026

Kenmore dryer

Internal space cleaning, belt replacement

Repaired · 90-day warranty
October 2026

Kenmore dryer

Control board replace, cleaning

Repaired · 90-day warranty
October 2026

Samsung dryer

Dryer: heating element replacement, heating element replacement

Repaired · 90-day warranty
October 2026

Electrolux dryer

Electrolux dryer high-limit thermostat replacement, cleaning of dryer interior and airflow system, vent duct hose cleaning

Repaired · 90-day warranty
September 2026

Whirlpool dryer

Whirlpool dryer idler pulley assembly, four drum rollers and drum belt replacements, dryer cleaning

Repaired · 90-day warranty

Real jobs from our records. Customer details are never shown.

Pricing · updated October 2026

How much does dryer repair cost in Denver?

Dryer Repair starts at $179*.

Common dryer repairs and starting prices
RepairFrom*
Thermal fuse or thermostat$179+
Heating element or gas igniter$179+
Belt, rollers or idler pulley$259+
Drive motor$259+
Control board$259+

* Labor only; parts are quoted separately.

See full price list →

Dryer brands we repair in Denver

We work on gas and electric dryers from Whirlpool, Maytag, GE, LG, Samsung, Kenmore and Frigidaire, and on Speed Queen, Electrolux, Bosch and Miele. Compact ventless and heat-pump dryers from Miele and Bosch are common in Denver condos, and they need their condenser and lint filters cleaned regularly to dry properly.

Commercial equipment in Denver

We repair commercial dryers in Denver laundromats and in on-premise laundry rooms at hotels, hospitals and apartment buildings, where lint load and vent airflow matter even more.

Commercial laundry repair →

Repair or replace your dryer?

Dryers usually last 10 to 13 years, and they are among the most repairable appliances in a home. Belts, rollers, idler pulleys, thermal fuses, elements and igniters are almost always worth replacing. A failed drive motor plus a control board on an older dryer can approach half the price of a new one, which is where replacement starts to make sense. Before buying new, fix the basement vent, because a new dryer on a clogged Highland or Berkeley vent run will struggle the same way.

Keep it running in Denver

  • Clean the lint screen every load and wash it with soapy water now and then, since dryer-sheet film plus static lint clogs the mesh quickly in Denver's low humidity.
  • Have long basement vent runs in older bungalows cleaned at least once a year, and swap any foil or vinyl flex duct for rigid or semi-rigid metal.
  • Check the exterior vent hood after heavy snow, because drifts and ice can block the flap on low basement outlets.
  • Wipe the moisture sensor bars inside the drum with rubbing alcohol every few months so auto-dry cycles end at the right time.

What Customers Say About Our Dryer Repairs

4.9 from 686 reviews · 541 on Google

★★★★★Google review
“Serge from the Appliance Team did an EXCELLENT job repairing our dryer! The service was quick and efficient! Would highly recommend 👍 …”
— Erikka Apolinar
★★★★★Google review
“Serge was great , very communicative and got everything done quickly and definitely will be calling for any future needs. My dryer works perfectly now”
— Lil Bee
★★★★★Google review
“Great experience. Easy online booking with reasonable time windows to choose from & I received a confirmation call right away. My technician, Serge, texted me when he was on the way & was very professional. He was very efficient in diagnosing & fixing my dryer issue. Would definitely use them again.”
— Cadee Harris

Read all reviews on Google →

Dryer Repair in Denver — FAQs

Long vent runs are common in older Denver homes with basement laundry. Every extra foot and elbow slows airflow and traps lint. We check airflow at the dryer and tell you whether the vent, not the dryer, is the problem.

Yes. We repair igniters, gas valve coils, flame sensors and burners on gas dryers throughout the city. If you smell gas, turn off the dryer and the gas supply and do not try to fix the connection yourself.

It does in one way. Low humidity makes static and lint worse, so lint builds up in the drum seals, blower and vent faster. Cleaning the lint screen every load and having the vent cleaned regularly keeps drying times short.

Yes. Closet and stacked dryers need careful access, and many vent through concealed ducts. We work within HOA and building rules and check the venting while we are there.

We start with a service call from $59, waived if you approve the repair. You get a written quote for the parts and labor before any work begins.

It can be, especially where a long exterior vent is not practical. Heat-pump and condenser dryers dry more slowly than vented models and depend on frequent filter and condenser cleaning. We repair them and can walk you through the upkeep your model needs.

Dryer acting up in Denver?

Clothes still damp after a full cycle? Book a visit and we will check the heat, the drum and the vent in one trip.

Dryer repair across Denver

We repair gas and electric dryers in every Denver neighborhood, from basement laundries in older homes in Berkeley, Sloan’s Lake and Washington Park to upstairs laundry closets in Central Park and Green Valley Ranch, and stacked units in condos in Capitol Hill, Uptown and LoDo. In Denver, the vent is often the real story. Older homes have long vent runs that were added on later, and many condos and townhomes vent through the roof or a long shared chase. Restricted airflow is behind a large share of the dryer calls we see.

What we fix most on Denver dryers

No heat or takes forever to dry

On electric dryers, a failed heating element and a blown thermal fuse are the most common causes. On gas dryers, it’s usually the igniter or the gas valve coils. The thermal fuse rarely fails on its own: it blows because the dryer overheated, and the dryer overheats because the vent is restricted. If we replace a fuse without fixing the airflow, it will blow again, so we check the vent on every no-heat call.

Squeaking, thumping and grinding

Worn drum support rollers, the idler pulley, the belt and drum glides make most of the noise. They wear as a set, so we usually replace them together. It costs less than coming back a second time.

Won’t start or stops mid-cycle

A failed door switch, thermal fuse, start switch, motor or control board stops a dryer. A dryer that stops halfway through a cycle and restarts after cooling down often has a motor overheating or a thermal limit tripping.

Gas dryers at altitude

Gas appliances at 5,280 feet run with less oxygen in the air. A gas dryer that lights but burns weakly, cycles on and off too often or smells of gas needs to be checked, not reset. We test the igniter, the valve coils and the flame sensor, and we look for the conditions that cause poor combustion.

Vent cleaning and dryer safety

Lint is flammable, and a clogged dryer vent is a fire risk as well as the cause of long dry times. Denver’s dry winter air also builds static and lint faster. We clean the dryer cabinet and the vent connection as part of many repairs, and we tell you if the full vent run needs professional cleaning. Signs your vent needs attention: clothes still damp after a full cycle, the laundry room getting hot, the dryer top hot to the touch, or a d80 or similar airflow code.

Stacked units and compact dryers

Stacked washer-dryers and compact European dryers are common in Denver condos. Heat pump and condenser dryers don’t vent outside at all; they have filters and a condenser that must be cleaned, and they dry slower by design. We repair them too and can show you what to clean and how often.

What to check before you call

  • Clean the lint screen and look at the vent hose behind the dryer for kinks or crushing.
  • Check the breaker. Electric dryers use two breakers or a double breaker; one tripped side can let the drum turn with no heat.
  • On a gas dryer, make sure the gas valve is open.
  • Go outside and check that the vent flap opens when the dryer runs.
  • Note any error code and the brand.

Repair or replace?

Elements, fuses, igniters, rollers, belts and switches are routine and worth repairing on almost any dryer. A failed motor or control board on an older budget dryer is a closer call. You get a written quote and an honest opinion before any work.

How a Denver dryer visit works

  1. Tell us gas or electric, the brand and the symptom.
  2. We give you an arrival window, often the same or next day.
  3. The technician tests the heat circuit, the drive and the airflow.
  4. You get a written quote before any repair. Most are finished on the first visit.
  5. Every repair carries our 90-day parts and labor warranty.
720-230-1229
720-230-1229
Call Now Book Online