Cooktop Repair
Gas, electric and induction cooktop repair across the Denver metro: burners that will not light, switches stuck on high, cracked glass and induction zones that shut off.
Cooktop repair in Denver, Boulder and Longmont, written from about 160 cooktop jobs in our service records. A built-in cooktop sits in a hole cut into your countertop, with the gas line or the electrical connection hidden in the cabinet below. That changes how repairs work: the top often has to be lifted out of the counter, the glass on a smoothtop is a part of its own, and a gas cooktop someone installed themselves is a common source of trouble. Since 2024 we have logged roughly 40 cooktop jobs in 2024, 75 in 2025 and 45 so far in 2026, on gas, electric radiant, coil, induction and downdraft models.

In short
- Every gas burner has its own valve; a gas smell or a burner that will not shut off needs a technician right away.
- On electric cooktops a dead burner is often the switch or board that controls it, not only the element.
- Cracked glass can be replaced on many models without replacing the whole cooktop.
- Induction cooktop repairs are about electronics: power boards and coils.
- We also install gas and electric cooktops.
What our cooktop tickets show
Here is what comes up in the notes on cooktop jobs. One ticket often mentions several things, and the numbers are rounded.
| In the technician’s notes | Tickets (approx.) | What it usually means on a cooktop |
|---|---|---|
| Burner problems | 50 | A gas burner that won’t light or stay lit, an electric zone that won’t heat |
| Not heating or not working at all | 45 | Power supply, terminal block, element, switch or board |
| Igniters and sparking | 35 | Igniter, spark switch harness, burner base |
| Gas valves and gas leaks | 20 | Burner valves, the central valve, the connection under the counter |
| Switches and knobs | 15 | Burner switches stuck on high, broken knobs or shafts |
| Control boards and touch panels | 12 | Unresponsive touch keys, shorted key codes, induction power boards |
| Glass tops | 10 | Cracked or shattered smoothtops, burned spots |
| Installation | 7 | New cooktops, gas and electrical hookups |
Gas cooktops make up most of our cooktop work. GE (including Profile, Café and Monogram) is the brand we see most, with about 30 tickets, followed by Samsung, Frigidaire, LG, KitchenAid, Whirlpool, Viking, Kenmore, Bosch and Electrolux.
Gas cooktops: leaks, valves and a self-install that went wrong
Every gas burner has its own valve behind the knob, and many cooktops also have a central valve or regulator where the gas line comes in. When one of those leaks or sticks, a burner may burn too high, keep igniting or let gas escape. Recent examples from our tickets:
- In Lafayette gas was leaking from the left rear burner of a GE cooktop, and that burner valve had to be replaced.
- In Erie the central gas valve of a cooktop was replaced this October.
- On a GE Profile in Erie with trouble at the burners and dials, the cooktop gas valve was replaced.
- On a Bosch in Denver one burner kept igniting on its own; three gas valves were replaced.
In Broomfield a homeowner had installed a new gas cooktop and connected it himself, and then smelled gas. Our technician fixed the leak by redoing the gas connection with a sealant rated for gas. Gas connections are the part of a cooktop install best left to a professional.

If you smell gas with every knob off, leave the house and call your gas utility from outside. We repair the cooktop once the utility has made the line safe.
Burners that won’t light or won’t stop clicking
When you turn a knob, a small switch behind it tells the spark module to fire every igniter at once. If nothing ticks at all, the spark module, its power supply or the harness is suspect. If only one burner fails to light, look at that burner’s cap, base and igniter first.

On a GE in Broomfield with igniter trouble, the spark switch harness for all five burners and a gas valve needed to be replaced. On a Bosch in Denver the burner base and igniter needed replacing, and the owner chose to fit the parts himself. Both are common outcomes: the igniter itself is not always the problem.
Electric smoothtops: elements, switches and glass
A radiant smoothtop has a heating element under each zone and a switch or board controlling it. Most “one zone doesn’t heat” calls turn out to be the element or its switch. In Brighton a Samsung needed a new dual radiant element, and in Arvada a KitchenAid cooktop had an element that had burned out. In Denver a cooktop where some burners were heating too much and one didn’t work at all needed three control switches.

When the whole cooktop is dead, look at the power first. In Boulder a cooktop with a wiring problem needed a new terminal block and power cord. In Thornton a cooktop needed a new 240-volt indicator light.

Cracked and shattered glass
Cracked glass is one of the cooktop repairs people are most surprised by: the glass panel can be replaced on many models without replacing the whole cooktop. This year we replaced or quoted glass on a Frigidaire in Littleton, a Frigidaire in Golden and a KitchenAid in Aurora, and in Arvada a KitchenAid glass top had shattered.

Stop using a cracked cooktop and switch it off at the breaker. Spills can run through the crack onto the elements and wiring below. Avoid sliding heavy cast iron, and never use the glass as a cutting board or a place to set hot lids upside down.
Induction cooktops
Induction cooktops heat the pan directly with a magnetic field, so their repairs are about electronics rather than elements. Two recent examples:
- In Longmont a GE Profile induction cooktop shut itself off about 10 seconds after a zone was turned on. The induction assembly was replaced.
- In Arvada a KitchenAid induction cooktop showed error F47, and the parts quoted were for its touch controls.


Before calling about induction: check that the pan is magnetic (a magnet should stick firmly to its base), that it is centered on the zone and that the bottom is flat. A pan that is too small or not magnetic will make the zone blink or refuse to start, which looks like a fault but isn’t.
Touch controls and shorted keys
Glass-top cooktops with touch controls have their own failures: keys that stop responding, a control lock that won’t release, or a key the electronics think is pressed all the time. In Golden a GE electric cooktop stopped heating after a power outage, although the touch controls still seemed to work. In Louisville a GE induction range needed a new control board or control panel. And in Boulder a JennAir reported “stuck/shorted key” and needed a new control panel.


Wipe the glass dry before you blame the controls: water or a damp cloth on the keys can lock them out or trigger a stuck-key message.
Downdraft cooktops
Downdraft cooktops pull smoke and grease down through a vent in the cooktop or a rising panel behind it, so grease ends up in a filter and a duct under the counter. In Arvada a customer called because grease was dripping from under the cooktop. Clean or replace the downdraft filter regularly so grease doesn’t build up in the duct and the cabinet.

Installing a new cooktop
We install gas and electric cooktops. A new cooktop often doesn’t match the old cutout exactly, and the gas or electrical connection has to match the new unit. A recent example is a JennAir cooktop we installed in Littleton. See kitchen appliance installation.

When cooktops break and where we work
Cooktop calls are fairly steady through the year, with a peak in October before the holidays: in 2025 October was our busiest month for cooktops and March the quietest. Longmont (about 28 cooktop calls since 2024) and Denver (about 27) lead our list, followed by Boulder, Broomfield, Erie, Aurora, Brighton, Arvada, Littleton and Westminster.
Repair or replace your cooktop?
Igniters, valves, switches, elements and even glass panels are usually worth replacing on a cooktop that otherwise works, especially because a new cooktop often means changing the countertop cutout. Replacement makes more sense when an older electric cooktop needs both new glass and a new board, or when the part is no longer made. See our guide to repair or replace.
Cooktop repair prices
| Repair | Starting price |
|---|---|
| Diagnostic visit (home) | From $59, credited toward the repair |
| Burner igniter or spark module | $179+ |
| Burner control switch | $179+ |
| Gas valve or pressure regulator | $259+ |
| Control board | $259+ |
| Glass top replacement | Quoted with the part for your model |
Prices are labor; parts are quoted separately. You approve the written price before work starts, and repairs carry a 90-day parts and labor warranty. Full list on our pricing page.
Before you call
- Find the model number. On a cooktop it is usually on a label under the unit, so a photo from the cabinet below helps, or check the installation manual.
- Tell us if it is gas, electric, induction or downdraft.
- Write down any code or message exactly.
- Clear the cabinet under the cooktop so the technician can reach the gas or electrical connection.
Related pages: range repair, oven repair, gas burner won’t light, electric burner not working, and brand pages for GE, Samsung, KitchenAid, Frigidaire, Bosch, JennAir, Viking and Wolf cooktops.
Common Cooktop Problems
What Customers Say About Our Range & Stove Repairs
4.9 from 686 reviews · 541 on Google
“Denys was here right away (within two hours of my call) to fix my gas range and stove. He diagnosed the problem quickly (multiple igniters going/ gone bad) and helped us get the stove fixed up, good as new. Thanks to Denys and The Appliance Team for their attention to detail and thoughtful service!”
“Serhii was fantastic! He was quick and efficient. Our stove stopped working and we called and he was able to come out the same day and have it fixed and repaired in less than 30 minutes. I highly recommend him and this company.”
“Oleksii and The Appliance Team were very diligent at getting to the bottom of or LG stove issues. Never giving up until we have a working stove again and not overcharging us along the way very happy to be baking again.”
Frequently Asked Questions
On many models, yes. The glass top is sold as a separate part, and replacing it is often less expensive than a new cooktop, which may also mean recutting the countertop. Stop using a cracked cooktop and turn it off at the breaker until it's repaired, because spills can reach the elements and wiring through the crack.
First make sure the pan works with induction: a magnet should stick firmly to its base. The pan also needs a flat bottom and should roughly match the size of the zone. If the right pan still won't heat, or the cooktop shuts off by itself or shows an error code, the power board or induction module is usually the problem.
Setting the cooktop into the counter is the easy part. The gas connection is where problems start: we've repaired leaks on cooktops that owners hooked up themselves. Have the gas connection made and leak-tested by a professional.
If the smell is strong or lingers with every knob off, leave the house and call your gas utility from outside. Once the utility has made it safe, we can find the leaking burner valve, central valve or fitting and repair it. Gas valve repairs start at $259 plus parts.
Yes. Besides the cooktop itself, downdraft models have a fan, a filter and ductwork under the counter. Grease buildup in the filter or duct is a common cause of poor venting and of grease dripping in the cabinet, so keep the filter clean.
More About Cooktop Repair
Cooktop Repair by brand
Error codes by brand
Troubleshooting guides
Maintenance guides
Service areas
Cooktop burner not working?
Call 720-230-1229. We answer 24/7 and send a technician the same or next day. 90-day warranty on parts and labor.
Photos from our range and oven repair calls
Real photos our technicians took on repair calls around Denver. Each caption names the city where the job was.






Recent cooktop repairs from our job log
These are recent cooktop repairs from our job records across the Denver metro (98 cooktop jobs in this record set), written the way our technicians logged the work.
| When | Where | Appliance | What we did |
|---|---|---|---|
| Nov 2026 | Longmont | GE cooktop | GE gas cooktop 4 igniters and 8 rubber grate feet replacements, gas burner heads and caps cleaning |
| Nov 2026 | Lafayette | JennAir cooktop | Control board replacement |
| Oct 2026 | Erie | cooktop | Cooktop burners cleaning |
| Oct 2026 | Erie | cooktop | Gas valve replacement, leak of the gas supply line to the middle burner |
| Oct 2026 | Arvada | cooktop | Glass cooktop replacement |
| Sep 2026 | Denver | Wolf cooktop | Right front Igniter replacement, electrical contact cleaning |
| Sep 2026 | Lafayette | GE cooktop | GE rear left gas valve replacement |
| Aug 2026 | Denver | cooktop | Gas supply line repair, cleaning |
| Aug 2026 | Superior | GE cooktop | Igniter replacement, Knobs replace, Cooktop Igniter Switch and Harness replace |
| Jul 2026 | Erie | GE cooktop | Two cooktop gas valves replacement |
| Jun 2026 | Broomfield | GE cooktop | Gas valve replace |
| Jun 2026 | Erie | cooktop | Wiring Harness replace |
| Jun 2026 | Boulder | cooktop | Spark module connection fixing |
| Mar 2026 | Thornton | cooktop | Replacing the indicator, drying it out, repairing the wiring after a short circuit |
Real jobs from our records. Customer names and addresses are never published.

