Thermador Oven Error Codes

Updated November 2026 · By Zach, EPA 608-certified appliance technician, The Appliance Team, Denver CO

Quick answer

Thermador says any oven code that starts with E and a number is a fault: press a key to stop the beeping, reset the oven, and call for service if it returns. On Masterpiece and Professional wall ovens, E1xx codes refer to the upper oven and E2xx to the lower oven; common ones are E101/E104 (temperature sensor), E106/E107 (door latch) and E115 (oven too hot). Older ovens use F codes, such as F3/F4 for the temperature sensor.

Thermador ovens use two main code families. Current wall ovens and ranges show E codes, often three digits where the first digit tells you which oven is affected. Older electronic controls show F codes. Thermador's own page gives the general steps; the specific meanings below come from Sears PartsDirect, PartSelect and AppliancePartsPros. Turn off the oven at the breaker before any hands-on check.

Thermador Oven error codes and what they mean

Code What it means What to try
E + number (any) Thermador's general fault message. Press TIMERS or any key to stop the beeping and reset the oven at the breaker. If the code keeps appearing, turn the oven off and call for service.
E0211 / E1601 / E0510 Home Connect software update error. Follow Thermador's Home Connect steps: check the Wi-Fi connection and retry the update.
E101 / E104 (E201 / E204) Upper oven temperature sensor failure (E2xx for the lower oven).
Call a technician
Reset at the breaker. If it returns, the sensor or its wiring needs service.
E106 (E206) Upper (lower) oven door latch will not lock.
Call a technician
Make sure nothing blocks the door, close it firmly, and reset at the breaker. If it returns, call for service.
E107 (E207) Upper (lower) oven door latch will not unlock.
Call a technician
Let the oven cool completely, then reset at the breaker. If the door stays locked, call for service.
E115 (E215) Upper (lower) oven temperature too high.
Call a technician
Turn the oven off at the breaker and let it cool. Do not keep using it if the code returns.
E116 / E122 / E123 Meat probe error. Remove the probe, check the jack is clean and dry, and try again. If the code shows without the probe, call for service.
E118 (E218) Upper (lower) oven cooling fan failure.
Call a technician
Stop using the oven and call for service.
E124 / E126 (E224 / E226) The door switch and the door latch switch disagree on the upper (lower) oven.
Call a technician
Reset at the breaker. If it returns, call for service.
E000 The user interface and control board do not match, usually after a wrong replacement part.
Call a technician
Call for service.
E003 / E303 User interface overheated (E003, above 185 degrees) or control board overheated (E303, above 212 degrees).
Call a technician
Turn the oven off and let it cool. Make sure the cooling vents are not blocked. If it returns, call for service.
E005 / E009 No communication between the user interface and the control board.
Call a technician
Reset at the breaker. If it returns, call for service.
E010 / E012 User interface memory error (E010) or faulty control board temperature sensor (E012).
Call a technician
Reset at the breaker. If it returns, call for service.
E011 / E014 / E032 Touch keys not working: a stuck button (E011), On/Off key not responding (E014), or several keys pressed for 10 seconds (E032). Condensation on the panel can cause it. Wipe the control panel with a dry cloth, turn the breaker off for 10 seconds, then back on.
E309 / E310 / E312 Control board failure.
Call a technician
Reset at the breaker. If it returns, call for service.
F0 / F1 Older ovens: electronic oven control failure.
Call a technician
Reset at the breaker. If it returns, the control needs service.
F2 Older ovens: oven temperature too hot, often from a relay or temperature sensor problem.
Call a technician
Turn the oven off at the breaker and do not use it until it is checked.
F3 / F4 Older ovens: oven temperature sensor (RTD) open (F3) or shorted (F4).
Call a technician
Reset at the breaker. If it returns, the sensor or harness needs service.
F7 Older ovens: function key stuck. Wipe the keypad dry and reset at the breaker. If it returns, call for service.
F8 / F9 Older ovens: internal logic failure. F9 is often tied to the door latch and its switches.
Call a technician
Reset at the breaker. If it returns, call for service.
Fd Older ovens: bake and broil relays operating at the same time.
Call a technician
Turn the oven off at the breaker and call for service.
E1 / E5-E8 / E10 / E15 (older E-series controls) Control board failure on older Thermador controls that use one- or two-digit E codes.
Call a technician
Reset at the breaker. If it returns, call for service.
E2 / E3 / E4 (older E-series controls) Oven temperature sensor (RTD) fault: E3 open, E4 shorted.
Call a technician
Reset at the breaker. If it returns, call for service.
E9 / E11 / E12 / E13 / E14 (older E-series controls) Door latch switch or latch motor problem.
Call a technician
Let the oven cool, close the door firmly, and reset at the breaker. If it returns, call for service.

What we find on Thermador ovens and similar ovens in the Denver area

We see fewer Thermador ovens than the big-volume brands: 4 service calls in our records since 2024. The parts that fail are much the same across brands, so here is what we found on all 645 oven calls in our records since 2024.

The oven repairs we do most often (all brands)

  1. Control board: 54 calls
  2. Igniter: 45 calls
  3. Bake or broil element: 26 calls
  4. Surface element or burner switch: 20 calls
  5. Wiring: 16 calls
  6. Convection fan: 15 calls
  7. Temperature sensor: 13 calls

Oven repairs from $250. Home diagnostic visit from $59, credited toward your repair. Call 720-230-1229.

Source: The Appliance Team service records, 2024–2026. Customer details removed.

Video: Thermador oven error codes

Video by Nicolas TV

What we see on Denver calls

  • An error code points to the system that reported the fault, not always to the part that failed.
  • Across all 645 oven calls in our records (all brands), the repairs we do most often: control board (54 calls), igniter (45) and bake or broil element (26).

Don’t want to do it yourself? Call 720-230-1229.

What you can safely check yourself

  1. Write down the full code, including all digits, before resetting.
  2. Press TIMERS or any key to stop the beeping.
  3. Turn the oven off at the circuit breaker for at least 30 seconds, then back on.
  4. Wipe the touch panel dry; steam and condensation can trigger key errors.
  5. For probe errors, unplug the probe and clean and dry the jack.
  6. Let the oven cool fully before trying to open a locked door.

When to call a technician

  • Any E code keeps returning after a reset.
  • The oven overheats, or E115, E215 or F2 appears.
  • The door will not unlock after the oven is cool.
  • A cooling fan code appears or you hear the fan stop.
  • Sensor or control board codes appear.

How to prevent this

Many of these breakdowns start with maintenance that was skipped. These guides show what to check, how often, and what happens if you don't:

All appliance maintenance guides →

Frequently asked questions

How do I reset a Thermador oven error code?

Press any key to stop the beeping, then turn the oven off at the circuit breaker for at least 30 seconds and turn it back on. If the code returns, Thermador recommends booking a service visit.

What does E115 mean on a Thermador oven?

E115 means the upper oven got hotter than it should. Turn it off and let it cool; if the code returns, a sensor, relay or control problem needs service.

What is the difference between E1xx and E2xx codes?

On Thermador double ovens, codes in the 100s refer to the upper oven and codes in the 200s to the lower oven. The last two digits describe the same fault in either oven.

What does E011 mean on a Thermador oven?

E011 points to a stuck key or a touch panel error. Wipe the panel dry, reset the breaker, and call for service if it keeps happening.

Sources: thermador.com, thermador.com, thermador.com, searspartsdirect.com, partselect.com, appliancepartspros.com. Codes and meanings can vary by model; check your owner's manual.

720-230-1229
720-230-1229
Call Now Book Online