On front-load washers, clean the drain pump filter at least once a month or about every 40 washes, as Samsung recommends. The filter catches coins, hair ties, lint and small socks before they reach the pump. When it clogs, the washer can’t drain, and the pump works itself to death.
What the drain pump filter does
Front-loaders and many compact washers have a small access door at the bottom front. Behind it is a screw-out filter in front of the drain pump. Top-loaders often have no user-serviceable filter, so debris goes straight to the pump.

This guide is part of our washer maintenance checklist. On the same appliance, also check washer door gasket mold and washer tub cleaning and odor prevention. Related guides for other appliances: dishwasher filter cleaning and commercial washer door, gasket and drain care.
What happens if the filter clogs
A drain pump is a small motor that expects free-flowing water. Every bit of debris makes it work harder.
Lint and debris collect Early
Inside: Lint, hair, coins and small items gather in the filter.
You notice: Usually nothing yet.
Draining slows Growing
Inside: Water moves slower. Cycles take longer.
You notice: Longer cycles, water in the drum at the end.
Drain errors and odor Serious
Inside: Standing water in the pump housing goes stale.
You notice: OE, 5E, F21 and similar drain codes, a sour smell.
Pump strains Severe
Inside: Debris jams or rubs the impeller. The motor runs hot.
You notice: Humming or grinding during drain.
Pump fails or leaks Critical
Inside: The impeller breaks or the motor burns out. Objects can crack the housing.
You notice: Washer won’t drain at all, water on the floor.
What it can cost you
Drain errorsOdorWet laundryDrain pump replacementLeaks


What a clean filter gets you
- Fast, complete draining.
- Fewer odors.
- A drain pump that lasts.
Warning signs
- Water left in the drum.
- Drain error codes.
- Humming or grinding during drain.
- Clothes very wet after spin.
How to clean the drain pump filter
- Let the water cool if you just ran a hot cycle.
- Lay towels down and put a shallow pan under the access door. Expect more water than the pan holds.
- Open the access door. If there is a small drain hose, drain through it first.
- Unscrew the filter slowly, letting water out in stages.
- Remove debris, rinse the filter and check that the pump impeller turns.
- Screw the filter back in firmly and close the door. Run a rinse-and-spin to check for leaks.

Brand notes
| Brand | What to know |
|---|---|
| Samsung | Clean the debris filter at least monthly or about every 40 washes. |
| LG | Pump filter behind the lower front panel; clear it if water stays in the drum. |
| Whirlpool / Maytag front-load | Filter behind the lower access panel on most models. |
| Kenmore / top-load models | Often no filter. Debris reaches the pump directly, so check pockets carefully. |
Photos from our service calls


When to call a technician
- The washer still won’t drain with a clean filter.
- The pump hums or grinds.
- Water leaks after cleaning.
FAQ
How often should I clean the washer filter?
Front-loaders: monthly or about every 40 washes. More often with pets or lots of towels.
Why is so much water coming out of the filter?
Every front-loader holds some water in the pump and hose. If the washer didn’t drain, it can be a lot.
Want a technician to do it? Call 720-230-1229. We serve Denver, Boulder County and 52 surrounding cities.