Washer Repair in Englewood, CO

Same-day washer repair across Englewood, including Downtown Englewood, CityCenter, Arapahoe Acres. All brands, written quote before any work.

Service call from $59, $0 with repair Same-day service 90-day parts & labor warranty
10,000+Repairs Completed
50+Brands Serviced
4.9Star Rating
SameDay Service
Washer repair · Englewood

For a washer in Englewood that won't drain, spin or fill, The Appliance Team repairs every major brand and same-day appointments are often available. You see the cause and a written price before we start. The service call (from $59) is dropped if you proceed, and the repair carries our 90-day parts and labor warranty.

Most Englewood washers live in a basement. Homes from the 1910s through the 1950s in Bates-Logan, Cherrelyn and the blocks near downtown put laundry downstairs, often beside an old concrete laundry tub and a floor drain. That setup is forgiving when a washer leaks, but it brings its own problems: uneven floors, old shutoff valves, and drain hoses hooked over a tub instead of into a proper standpipe.

Washing Machine Repair Across Englewood's Basements and Apartments

Basement laundry in older Englewood homes often sits on a sloped or patched concrete floor. A washer that is not level on that surface walks during spin, and the vibration wears shocks and suspension springs early. Many of these homes also have original multi-turn valves that seize or drip when finally closed, and rubber fill hoses that have been in place for years. We level the machine, check the hoses and tell you if a valve needs a plumber's attention.

Englewood Utilities treats South Platte water at the Allen Water Treatment Plant, and the city has projects underway to improve taste, odor and hardness. We have no published hardness number to quote, but washer inlet screens here regularly show sediment and mineral buildup on service calls. A partly blocked screen causes slow fills, error codes and loads that never get fully wet, so cleaning the screens is a standard step on Englewood visits.

The newer apartments around CityCenter and Hampden Hills usually have stacked or side-by-side units in a closet, with a pan and drain beneath them. Those calls are mostly drain pumps, door locks and suspension wear. In the more recent homes of the southeast quadrant, laundry tends to be on the main floor, where a leak matters more and we look closely at hoses and the door boot.

Common washer problems we fix in Englewood

01

Washer walks across the basement floor

Uneven concrete, worn leveling feet or failing shocks let the machine rock during spin. We level it, test the suspension and replace worn dampers or springs.

02

Water left in the tub

A blocked pump filter, a failed drain pump or a hose kinked against the laundry tub is the usual cause. We clear the blockage and test the pump.

03

Leak around the base

Fill hoses, a torn door boot on front-loaders or a cracked tub seal on top-loaders are typical. We trace the water with the panels off and replace the failed part.

04

Fills slowly or only partly

Clogged inlet screens and a weak water valve are the first things we test, and in Englewood the screens often carry visible deposits. We clean or replace them and check the valve coils.

05

Old top-loader swishes the clothes but never spins them out

A worn lid switch, broken drive coupling or failed shifter is common on older top-loaders. We test each and replace the part that has failed.

06

Washer quits mid-cycle and flashes a code

Modern washers stop on drain, fill, lock or imbalance faults. We read the code and test the component behind it rather than replacing the board first.

Before you call: safe checks

  1. Close the hot and cold valves behind the washer if it is leaking, and unplug it with dry hands.
  2. Check that the drain hose is secured into the standpipe or laundry tub and not kinked or pushed too deep.
  3. On front-loaders, open the pump filter at the lower front with towels down to clear coins and lint.
  4. Rock the washer by its corners; if it moves, adjust the leveling feet before running another load.
  5. Run a small load to see whether the problem repeats, and note any error code shown.

Recent washer repairs in Englewood

From our job records: 22 washer repairs completed in Englewood since January 2024.

What we fix most on washers in Englewood

We counted 73 washer repair jobs in Englewood and nearby Denver in our job records. This is what those jobs needed and which brands they were, so you can see what is likely wrong with yours before we arrive.

Brands we repaired most: LG (11), Bosch (10), Whirlpool (5), Frigidaire (4), GE (4), Samsung (4).

  • Drain pump — 13 jobs. A clogged or failed pump leaves water in the drum and triggers drain codes.
  • Control board and panel — 10 jobs. Dead panels, random stops and water-damaged controls.
  • Door boot — 6 jobs. Torn or moldy boots cause leaks and smells on front-loaders.
  • Water inlet valve — 4 jobs. A leaking or weak valve causes leaks, slow fill or fill errors.
  • Motor, stator and speed sensor — 3 jobs. Spin and agitation faults on direct-drive washers.
  • Door or lid lock — 2 jobs. A failed lock stops the washer from starting or spinning.
Washer repair in Englewood, CO - photo from a real job by The Appliance Team
Washer repair in Englewood
Dishwasher repair in Englewood, photo from our job records
Dishwasher repair in Englewood
Washer repair in Littleton, CO - photo from a real job by The Appliance Team
Washer repair in nearby Littleton
Dryer repair in Englewood, photo from our job records
Dryer repair in Englewood
Oven repair in Englewood, photo from our job records
Oven repair in Englewood
Washer repair in Littleton: photo from one of our jobs
Washer repair in nearby Littleton
January 2026ZIP 80113

washer

Cleaned the drain hose and calibrated the washer.

Repaired · 90-day warranty
December 2025ZIP 80113

washer

Replaced the water inlet valves.

Repaired · 90-day warranty
October 2026

washer

Rubber boot cleaning, internal cleaning

Repaired · 90-day warranty

Real jobs from our records. Customer details are never shown.

Pricing · updated October 2026

How much does washer repair cost in Englewood?

Washer Repair starts at $179*.

Common washer repairs and starting prices
RepairFrom*
Lid lock or door latch$179+
Drain pump$179+
Door boot seal$259+
Drive motor or control board$259+
Bearings or transmission$479+

* Labor only; parts are quoted separately.

See full price list →

Washer brands we repair in Englewood

We repair Whirlpool, Maytag, GE, LG, Samsung, Kenmore, Electrolux and Bosch washers, plus Speed Queen and Miele. Speed Queen top-loaders are a common choice for older Englewood basements, and their simple mechanical design means repairs are usually straightforward.

Commercial equipment in Englewood

Apartment laundry rooms around CityCenter and Hampden Hills and other shared laundries in Englewood run commercial washers, and we repair them for property managers.

Commercial laundry repair →

Repair or replace your washer?

Washers typically last about 10-13 years. Drain pumps, lid switches, door locks, couplings, valves and shocks are almost always worth repairing. Transmission or bearing failures on an older machine are where the 50% rule applies: if the repair nears half the price of a comparable new washer, replacing it is reasonable. In older Englewood basements, also confirm the replacement will make it down the stairs and through the doorway before you buy.

Keep it running in Englewood

  • Clean the washer's inlet screens once a year; Englewood's water still leaves deposits while the city works on hardness.
  • Replace old rubber fill hoses with braided ones, and exercise old basement shutoff valves now and then so they do not seize.
  • Keep the washer level on uneven basement concrete, checking the feet whenever it is moved.
  • In apartment closets, keep the drain pan and its outlet clear.

What Customers Say About Our Washer Repairs

4.9 from 686 reviews · 541 on Google

★★★★★Google review
“Zack is great! He fixed my washer leak a year ago. In the meantime, he also cleaned the back of my fridge from dust. This time it was the dryer. The drum was not spinning. Zack spined the drum by hand and he said is the motor. He made a very quick diagnosis. He took the dryer apart and he found few
— Angelika Molas
★★★★★Google review
“Serhii was fantastic! He was friendly, knowledgeable, efficient, and kept us informed throughout the entire process. He quickly diagnosed the issue with our washer, ordered the necessary parts, and returned just two days later to complete the repair. The service was professional and seamless from
— Eliza Mirabile
★★★★★Google review
“I had an excellent experience getting my washer machine fixed. Denys The technician quickly identified the problem and repaired it efficiently. The service was professional, honest, and reasonably priced.”
— Quyen Doan

Read all reviews on Google →

Washer Repair in Englewood — FAQs

Yes. Most of our Englewood washer calls are in basements. We work around low ceilings, narrow stairs and laundry tubs, and we tell you if a valve or drain needs a plumber.

Often the inlet screens are partly clogged. Englewood treats its own water and is working on hardness, and we regularly find deposits on those screens. Cleaning or replacing them usually fixes it.

It can be. Older basement floors are often uneven, and a washer that is not level will rock. If leveling does not stop it, worn shocks or springs are next on the list.

Yes. We repair in-unit stackables and full-size machines and work with residents or property managers on approvals.

Yes. Many Englewood homes still have older top-loaders, and parts like couplings, lid switches and pumps are usually available.

There is a service call from $59, waived if you approve the repair. You see the written quote after the technician finds the fault, before anything is replaced.

Washer acting up in Englewood?

Standing water in the drum or a machine that will not spin? Book now and we will bring common washer parts on the first visit.

720-230-1229
720-230-1229
Call Now Book Online