5 Common Dryer Problems and How to Fix Them

Most dryer calls fall into five problems: no heat, clothes that take too long to dry, a noisy drum, a drum that won’t turn and lint-choked airflow. Across 983 dryer calls in our records since 2023, the heating element was the most replaced part (88 calls), followed by belts (35) and drum rollers or idler pulleys (33). Here is how to tell the problems apart and what you can check yourself.

At a glance

  • No heat: the heating element was the cause on 50 of our 180 no-heat calls, far ahead of the thermal fuse or thermostat (12).
  • Long dry times usually start with airflow: a clogged vent or lint was the top finding.
  • Rumbling, thumping or squealing almost always means worn rollers, an idler pulley or a belt.
  • Clean the lint screen every load and the vent duct regularly. It prevents several of these failures.

1. The dryer runs but doesn’t heat

Since 2023 we have been called out for a dryer that won’t heat 180 times across the Denver metro and Boulder County. On electric dryers, check the breaker first: a dryer can tumble on half of its 240-volt power and still make no heat. If power is fine, the heating element is the most likely part. On Whirlpool dryers the element we install most is WP3387747; on Samsung, DC47-00019A. A blown thermal fuse is the next suspect, and it often blows because the vent is restricted.

Full guide: dryer not heating.

Checking airflow at the vent of a Whirlpool dryer that wasn't heating in Broomfield
Checking airflow at the vent of a Whirlpool dryer that wasn’t heating in Broomfield. The heating element was replaced.

2. Clothes take too long to dry

If the dryer heats but needs two or three cycles, look at airflow before parts. A clogged vent or lint was the most common finding on these calls, ahead of thermistors and belts. On a call in Longmont, a Whirlpool that wasn’t drying properly had its foil vent duct packed with lint; cleaning the airflow path and replacing the duct fixed it. Heat-pump dryers have their own lint traps and coils that need cleaning: a Whirlpool heat-pump dryer in Denver needed an internal cleaning and a new belt.

Full guide: dryer takes too long to dry.

Lint packed into the foil vent duct of a Whirlpool dryer that wasn't drying in Longmont
Lint packed into the foil vent duct of a Whirlpool dryer that wasn’t drying in Longmont. We cleaned the airflow path and replaced the duct.
Lint buildup inside a Whirlpool heat-pump dryer that took too long to dry in Denver
Lint buildup inside a Whirlpool heat-pump dryer that took too long to dry in Denver. An internal cleaning and a new belt fixed it.

3. The dryer is loud: rumbling, thumping or squealing

We have been called out for a noisy dryer 140 times since 2024. Worn drum rollers or an idler pulley were the most common cause (13 calls), then the drive belt (5). Rumbling or thumping points to rollers; a high squeal points to the idler pulley; slapping points to a frayed belt. Most brands sell these as one repair kit, and replacing them together is usually the right fix.

Full guide: dryer making noise.

A Samsung dryer with the drum removed after it came off its rollers in Arvada
A Samsung dryer with the drum removed after it came off its rollers in Arvada. We installed a new repair kit.

4. The drum won’t turn

If you hear the motor hum but the drum doesn’t move, the belt has usually broken or slipped off, or a seized roller is holding the drum. A drum knocked off its rollers is also possible: on a Samsung we serviced in Arvada, the drum had come off its axle and needed a new repair kit. If you hear nothing at all, check the door switch and the thermal fuse, which stops the motor on many models.

5. Lint and restricted airflow

Lint is behind a large share of dryer failures. It slows drying, overheats the heater and blows thermal fuses, and it is a fire risk. Clean the lint screen every load and replace it if the mesh is torn, as we did on a Samsung in Lakewood. Have the vent duct cleaned regularly, and replace crushed foil ducts with rigid or semi-rigid metal. Our dryer vent cleaning guide covers how often.

A worn Samsung dryer lint screen we replaced in Lakewood
A worn Samsung dryer lint screen we replaced in Lakewood.

What you can safely check yourself

  • Clean the lint screen and wash it if it looks clogged with fabric-softener residue.
  • Check the outside vent hood: the flap should open when the dryer runs and the airflow should feel strong.
  • Reset the breaker for an electric dryer, or confirm the gas valve is open on a gas dryer.
  • Unplug the dryer before touching anything inside, and leave gas parts to a technician.

Frequently asked questions

What is the most common dryer repair?

In our records, the heating element: 88 of 983 dryer calls since 2023. Belts and drum rollers or idler pulleys come next.

Why does my dryer run but not heat?

Most often a failed heating element on electric dryers, then a blown thermal fuse or thermostat. On electric models, a tripped breaker can also leave the drum turning with no heat.

Why is my dryer suddenly so loud?

Worn drum rollers, an idler pulley or a belt. These usually wear together, and a repair kit replaces all of them.

Dryer not heating, slow or loud? Call 720-230-1229.

Written by Zach EPA 608-certified appliance technician

Zach is an EPA Section 608-certified technician at The Appliance Team, servicing homes and businesses across the Denver metro. The repair advice on this blog comes from the jobs our technicians handle every week.

How to prevent this

Many of these breakdowns start with maintenance that was skipped. These guides show what to check, how often, and what happens if you don't:

All appliance maintenance guides →

← Previous Why You Should Hire a Professional Appliance Repair Company Next → Dishwasher Leaking From the Bottom: Causes and Solutions

Need Appliance Repair?

Don't wait — get fast, professional service today.

720-230-1229
720-230-1229
Call Now Book Online