Dryer Repair in Lakewood, CO

Same-day dryer repair across Lakewood, including Belmar, Green Mountain, Solterra. All brands, written quote before any work.

Service call from $59, $0 with repair Same-day service 90-day parts & labor warranty
10,000+Repairs Completed
50+Brands Serviced
4.9Star Rating
SameDay Service
Dryer repair · Lakewood

Our technicians repair gas and electric dryers of all major brands across Lakewood, and same-day appointments are often open. We find the cause, put the price in writing and start only when you approve. The service call (from $59) is waived with the repair, and the work is backed by a 90-day parts and labor warranty.

If your Lakewood dryer needs two cycles to finish a load, look at where it lives. In the 1960s bi-levels and split-levels that make up much of Lakewood, the dryer usually sits on the lower level and vents through a finished wall or ceiling to the outside. Those runs are long, hidden and rarely cleaned. A heating element or thermal fuse may be the part that failed, but restricted airflow is very often the reason it failed.

Lakewood Dryers, Vent Runs and Gas Hookups

Airflow is the first thing we measure. A dryer pushes hot, moist air through its vent, and when lint packs into a long run with several elbows, the dryer overheats and cycles off its high-limit thermostat. Clothes come out damp, the cabinet feels hot, and eventually a thermal fuse or heating element gives up. In split-levels around Morse Park, Union Square and South of 6th, vents that pass through ceilings and finished walls are the norm, so we check the vent along with the dryer.

Belmar condos and townhomes have their own version of this. Stacked laundry in a closet often vents through a long, concealed duct that collects lint where you cannot see it. We service the dryer in place, and if the vent is the bottleneck we tell you so you can arrange cleaning through your HOA or a vent contractor.

Many Lakewood homes run gas dryers on Xcel Energy service. Older shutoff valves and connectors from earlier remodels are common, and we look at them when we service or reconnect a gas dryer. At about 5,650 feet, a gas dryer burner needs to be set up correctly for altitude. One that was not adjusted can light poorly or burn with a lazy yellow flame. We never ask homeowners to work on gas connections themselves.

Common dryer problems we fix in Lakewood

01

Dryer runs but there's no heat

On electric models, a burned-out heating element, a blown thermal fuse or a failed high-limit thermostat are the usual causes. On gas models, the igniter, flame sensor or gas valve coils are common failures. We test each part and look for the airflow problem that caused it.

02

Clothes take two cycles to dry

A restricted vent, a clogged lint housing or a cycling thermostat that shuts off heat too early slows drying. We check vent airflow and test the thermostats and moisture sensor before replacing parts.

03

Thumping or squealing when it tumbles

Worn drum rollers, a glazed idler pulley or worn drum glides make most of the noise. We replace the worn parts and the belt if it is cracked.

04

Gas model glows or clicks, then no flame

A weak igniter, a bad flame sensor or failing gas valve coils will keep the burner from lighting. We test these parts and confirm the burner is adjusted properly for Lakewood's elevation after the repair.

05

Stops partway through the cycle

Overheating from poor airflow, a failing motor or a door switch problem can stop the cycle. We check the vent, the motor and the thermal protection devices.

06

Burning smell when the dryer heats

Lint that has worked into the cabinet around the heater housing, a failing motor or a belt slipping over a seized roller can all smell hot. Turn the dryer off until it is checked. We open the cabinet, remove lint near the heat source and test the motor and rollers.

Before you call: safe checks

  1. Wash the lint screen in warm, soapy water if dryer sheets have left a waxy film that blocks airflow.
  2. With the dryer running, go outside and feel for strong airflow at the exterior vent hood; a weak puff points to a clogged run.
  3. Check the panel for a tripped double breaker if an electric dryer turns but makes no heat.
  4. Make sure the door closes firmly and the start button is not sticking, since a worn door switch or latch will keep many dryers from running.
  5. Look behind the dryer for a crushed or kinked transition duct, which happens often when a lower-level dryer is pushed tight to the wall.

Recent dryer repairs in Lakewood

From our job records: 62 dryer repairs completed in Lakewood since January 2024.

What we fix most on dryers in Lakewood

We counted 16 dryer repair jobs in Lakewood and nearby Wheat Ridge, Golden in our job records. This is what those jobs needed and which brands they were, so you can see what is likely wrong with yours before we arrive.

Brands we repaired most: Samsung (5), Maytag (2), Speed Queen (1), Whirlpool (1), Kenmore (1), GE (1).

  • Heating element — 6 jobs. The most common reason an electric dryer runs but stays cold.
  • Drive belt — 4 jobs. A broken belt means the motor runs but the drum doesn't turn.
  • Thermal fuse — 2 jobs. A blown fuse means the dryer overheated, usually from a restricted vent.
  • Thermostats and thermistor — 2 jobs. They keep the dryer from overheating; a failed one causes no heat or overheating.
  • Vent and lint cleaning — 1 job. Clogged vents cause long dry times, blown fuses and burned elements.
  • Door switch and hinge — 1 job. A dryer that won't start or stops when bumped often has a door switch or hinge problem.
Dryer repair in Lakewood, CO - photo from a real job by The Appliance Team
Dryer repair in Lakewood
Dryer repair in Lakewood: photo from one of our jobs
Dryer repair in Lakewood
Dryer repair in Lakewood: photo from one of our jobs
Dryer repair in Lakewood
Dryer repair in Lakewood: photo from one of our jobs
Dryer repair in Lakewood
Dryer repair in Lakewood: photo from one of our jobs
Dryer repair in Lakewood
Dryer repair in Denver, CO - photo from a real job by The Appliance Team
Dryer repair in nearby Denver
May 2026ZIP 80215

dryer

Replaced the heating element and drum belt.

Repaired · 90-day warranty
October 2026

Samsung dryer

Lint filter replacement

Repaired · 90-day warranty
October 2026

LG dryer

Washer dryer drum rollers and idler pulley replacements, dryer cleaning

Repaired · 90-day warranty
August 2026

Samsung dryer

Drum adjustment

Repaired · 90-day warranty
June 2026

dryer

Heating element replace

Repaired · 90-day warranty

Real jobs from our records. Customer details are never shown.

Pricing · updated October 2026

How much does dryer repair cost in Lakewood?

Dryer Repair starts at $179*.

Common dryer repairs and starting prices
RepairFrom*
Thermal fuse or thermostat$179+
Heating element or gas igniter$179+
Belt, rollers or idler pulley$259+
Drive motor$259+
Control board$259+

* Labor only; parts are quoted separately.

See full price list →

Dryer brands we repair in Lakewood

We work on dryers from Whirlpool, Maytag, GE, Samsung, LG, Kenmore, Frigidaire and Electrolux, plus Bosch and Miele compact and heat-pump models found in some Belmar condos. Speed Queen dryers, which are built for heavy use, are also on our list. Heat-pump and condensing dryers do not vent outside, so they need different service steps.

Commercial equipment in Lakewood

We repair commercial dryers for on-premise laundry at Lakewood hotels near Sixth Avenue and Wadsworth, apartment laundry rooms and other facilities that do their own washing.

Commercial laundry repair →

Repair or replace your dryer?

Dryers usually last about 10 to 13 years, and they are among the most repairable appliances in the house. Heating elements, thermal fuses, igniters, belts, rollers and idler pulleys cost little enough that fixing them is almost always worth it. Replacement makes sense when a repair would pass half the cost of a new dryer, such as a failed control board or motor on an older model, or when the drum is damaged. In a Lakewood split-level, fixing the vent first keeps any new or repaired dryer from failing the same way.

Keep it running in Lakewood

  • Have the vent in a 1960s split-level or bi-level cleaned every year or two, since it often passes through finished walls or ceilings you cannot reach.
  • Replace foil or vinyl transition ducts behind lower-level dryers with semi-rigid metal and keep the bends gentle.
  • In Belmar stacked-laundry closets, ask your HOA when the concealed vent was last cleaned, and clear the lint screen after every load.
  • On gas dryers, have a technician look at the flame if it ever turns yellow or lazy, since burners at about 5,650 feet should be set up for elevation.

What Customers Say About Our Dryer Repairs

4.9 from 686 reviews · 541 on Google

★★★★★Google review
“Serge from the Appliance Team did an EXCELLENT job repairing our dryer! The service was quick and efficient! Would highly recommend 👍 …”
— Erikka Apolinar
★★★★★Google review
“Serge was great , very communicative and got everything done quickly and definitely will be calling for any future needs. My dryer works perfectly now”
— Lil Bee
★★★★★Google review
“Great experience. Easy online booking with reasonable time windows to choose from & I received a confirmation call right away. My technician, Serge, texted me when he was on the way & was very professional. He was very efficient in diagnosing & fixing my dryer issue. Would definitely use them again.”
— Cadee Harris

Read all reviews on Google →

Dryer Repair in Lakewood — FAQs

Lower-level laundry in 1960s split-levels usually vents through a long run inside finished walls or ceilings. Lint builds up in that run and restricts airflow. We test the dryer's heating and airflow parts and tell you if the vent needs a professional cleaning.

Yes. Gas dryers at about 5,650 feet should be set up for altitude when installed. If the burner lights poorly or the flame is yellow, we inspect the burner and gas valve parts. Gas line work is for a professional only.

Yes. We service stacked and compact dryers in place, and we work within your building's access rules. If a concealed vent run is causing the problem, we let you know so it can be cleaned.

The visit starts with a service call from $59, and we give you a written quote for the repair after diagnosis. If you go ahead, the service call is waived. If you decline, you only pay the fee.

Yes. Heat-pump and condensing dryers from Bosch, Miele, LG and others do not vent outside, so their lint filters, condenser area and water collection need regular cleaning. When one of these units stops drying, we check those areas along with the fans, pump and sensors.

Dryer acting up in Lakewood?

Clothes still damp after a full cycle? Book a visit and we will check the heat, the drum and the vent in one trip.

720-230-1229
720-230-1229
Call Now Book Online