Samsung Refrigerator Error Codes

Updated November 2026 · By Zach, EPA 608-certified appliance technician, The Appliance Team, Denver CO

Quick answer

Samsung refrigerator codes ending in E are sensor, fan, heater or compressor faults. Fan codes 21E and 22E often come from ice buildup or a door left open, and power codes like 83E, 85E, 86E and 88 88 can clear after a one-minute power reset. Sensor and ice maker codes (5E, 8E, 14E, 33E, 39E, 40E) need a technician, and OF OF just means the fridge is in demo mode.

Samsung refrigerators show a code on the display panel when the control board detects a problem. Samsung advises not to unplug the fridge or press the panel to clear a code unless a step tells you to, because the stored code helps a technician diagnose the fault. Write the code down before you do anything else. On Family Hub models, you can run a Self Check from Apps, Fridge Manager, Fridge Settings to see current and past codes. The list combines the manufacturer's own code lists with service manuals and repair-parts references. Rows marked "on some models" or "service references" come from those repair sources, so the meaning can vary by model; check your owner's manual when in doubt.

Samsung Refrigerator error codes and what they mean

Code What it means What to try
OF OF / O FF / OFF OFF Cooling Off (demo or showroom) mode. The display works but cooling, ice making and the water dispenser are off. Press and hold the top two buttons on the left side of the panel for 5-8 seconds until it chimes. Some newer models also need the top right button. Your manual lists the exact buttons.
1E / 1C Freezer temperature sensor error. On some models, 1E/SE can also appear after a power interruption or low voltage.
Call a technician
Unplug the fridge or turn off its breaker for 60 seconds, then restore power. If the code returns, the sensor or its wiring needs service.
2E Refrigerator compartment temperature sensor error.
Call a technician
Unplug the fridge or turn off its breaker for 60 seconds, then restore power. If the code returns, the sensor or its wiring needs service.
4E Freezer defrost (evaporator) sensor error. Frost may build up on the freezer back wall.
Call a technician
Unplug the fridge or turn off its breaker for 60 seconds, then restore power. If the code returns, the sensor or its wiring needs service.
5E Fridge defrost sensor error.
Call a technician
Note the code and request service. A failed defrost sensor leads to ice buildup and poor cooling.
6E Ambient (room) temperature sensor error.
Call a technician
Unplug the fridge or turn off its breaker for 60 seconds, then restore power. If the code returns, the sensor or its wiring needs service.
7E On some models: pantry drawer temperature sensor error.
Call a technician
Unplug the fridge or turn off its breaker for 60 seconds, then restore power. If the code returns, the sensor or its wiring needs service.
9E / 11E On 4-door models with a Cool Select (FlexZone) drawer: drawer temperature sensor (9E) or drawer defrost sensor (11E) error.
Call a technician
Unplug the fridge or turn off its breaker for 60 seconds, then restore power. If the code returns, the sensor or its wiring needs service.
13E / 16E Humidity sensor error (13E external humidity sensor, 16E refrigerator humidity sensor on some models).
Call a technician
Unplug the fridge or turn off its breaker for 60 seconds, then restore power. If the code returns, the sensor or its wiring needs service.
8E Ice maker (freezer) sensor error.
Call a technician
Request service.
14E Ice maker sensor error.
Call a technician
Request service.
15E Ice room temperature sensor error.
Call a technician
Unplug the fridge or turn off its breaker for 60 seconds, then restore power. If the code returns, the sensor or its wiring needs service.
21E Freezer fan error. The fan is not reporting rotation, often because it is frozen in ice or the motor failed.
Call a technician
Make sure the freezer is not overpacked and the door gaskets seal fully. A manual defrost can free an iced fan, but if the code returns, the defrost system or fan needs service.
22E / 22C Fridge fan error, possibly from a door left open too long. Move food to a cooler, unplug the fridge, leave the doors open for a few hours to melt ice, then plug back in and close the doors. If it returns, request service.
23E Condenser fan error.
Call a technician
Unplug the fridge. Check that nothing blocks the rear lower vent and vacuum dust from the back of the unit. Restore power. If the code returns, the fan or its wiring needs service.
24E Freezer defrost system failure. Ice builds up on the evaporator and cooling drops.
Call a technician
Move food to a cooler. A full manual defrost (unplugged with doors open for several hours) can restore cooling for a while, but the defrost heater, sensor or control needs service.
25E Refrigerator defrost system failure.
Call a technician
A manual defrost can restore cooling temporarily. The defrost heater, sensor or control needs service.
29E / 31E On 4-door models with a Cool Select drawer: drawer defrost system failure (29E) or drawer fan failure (31E). Depending on model, service references also list 29E as an ice room sensor error.
Call a technician
Make sure nothing blocks the drawer vents, then power off for 60 seconds. If it returns, request service.
26E On some models: ice maker failure.
Call a technician
Turn the ice maker off and on, and check that the water supply valve is open. If the code returns, the ice maker needs service.
33E Ice pipe heater error.
Call a technician
Request service.
39E / 39C Ice maker function error.
Call a technician
Request service.
40E / 40C Ice room fan error.
Call a technician
Request service.
61E / 65E Ice dispenser duct heater (61E) or ice room heater (65E) failure on some models.
Call a technician
Request service.
27E On some models: pantry drawer air damper heater failure.
Call a technician
Request service.
66E Door heater failure on some models. Sweating along the door edges may appear.
Call a technician
Request service.
71E / 72E Freezer (71E) or refrigerator (72E) compartment temperature is too high. Make sure the doors close and seal, vents inside are not blocked by food, and the condenser area is not clogged with dust. Give it up to 24 hours to recover. If the code returns, request service.
81E Compressor failed to start.
Call a technician
Cut power for 60 seconds, then restore it. If it returns, request service. Compressor and sealed-system work is not DIY.
82E Compressor inverter board failure.
Call a technician
Cut power for 60 seconds, then restore it. If it returns, request service.
83E Compressor abnormal current, possibly from a power surge.
Call a technician
Unplug the fridge or turn off its breaker for 60 seconds, then restore power. If it returns, request service. Compressor and sealed-system work is not DIY.
84C Compressor lock.
Call a technician
Request service. This needs sealed-system diagnosis.
84E Compressor locked (shown as 84C on some models).
Call a technician
Request service. This needs sealed-system diagnosis.
85E Compressor undervoltage, possibly from a brownout.
Call a technician
Cut power for 60 seconds, then restore it. If it returns, request service.
86E Compressor overvoltage, possibly from a surge such as a thunderstorm.
Call a technician
Cut power for 60 seconds, then restore it. If it returns, request service.
87E / 88E / 89E / 90E / 91E / 92E 4-door models with two compressors: errors for the second (refrigerator) compressor: failed to start, inverter board failure, abnormal current, locked, low voltage, high voltage.
Call a technician
Cut power for 60 seconds, then restore it. If it returns, request service. Not related to the 88 88 display code.
88 88 Communication fault, often from a power disruption during startup. Cut power for 60 seconds, then restore it. If it returns, request service.
41E / Er Pc Communication error between the control panel and the main control board. Not the same as the Family Hub 41/42 screen fault.
Call a technician
Cut power for 60 seconds, then restore it. If the doors were removed or moved, have the door wire harness connection checked. If it returns, request service.
PC ER / PC CH Communication error between components, from a surge or a door wiring connection that is not seated.
Call a technician
With the fridge unplugged, check that the wire harness connector above the door is firmly connected, then restore power. If it returns, request service.
85C Low supply voltage warning, often after a brief outage (Family Hub). Press and hold OK for 3 seconds to clear it. It is harmless if it does not repeat.
41 / 42 (blue lights flashing) Family Hub screen fault. Reboot using the power switch inside the top of the right door. If it continues, request service.
41C Family Hub fault on 3-door French door models. Install the latest software update and tap OK the first time it appears. If it recurs, request service.
76C / Autofill light blinking Water detected in the Autofill pitcher compartment. Remove the pitcher, dry the compartment, and check the pitcher for leaks.
Ice Off blinking Ice bucket missing or not seated correctly. Remove and reinsert the ice bucket until it seats fully.
AP Wi-Fi access point mode for SmartThings setup. Not a fault. Finish setup in the app, or wait for it to time out.
3E / 3C On some models: refrigerator (or freezer) defrost sensor error.
Call a technician
Unplug the appliance for 5 minutes, then restart. If the code returns, write it down and call a technician.
28E On some models (service references): fridge-side ice maker function error.
Call a technician
Check that the ice bucket is seated and the ice maker is not blocked by ice. If it returns, call a technician.
30E Commonly reported as an ice maker fan error: the fan is not sending a rotation signal, from a wiring contact problem or a failed fan motor.
Call a technician
Check for ice buildup in the ice maker compartment and make sure the ice maker door seals. If 30E returns, call a technician.
34E On some models (service references): refrigerator defrost heater error.
Call a technician
Unplug the appliance for 5 minutes, then restart. If the code returns, write it down and call a technician.
35E / 45E / 45C On some models (service references): refrigerator ice duct heater error.
Call a technician
Unplug the appliance for 5 minutes, then restart. If the code returns, write it down and call a technician.
36E / 46E / 46C / 43E On some models (service references): ice bucket or ice room heater error.
Call a technician
Unplug the appliance for 5 minutes, then restart. If the code returns, write it down and call a technician.
42E On some models (service references): ice maker (fridge side) function error. On some Family Hub models 42 is a screen fault instead (see above).
Call a technician
Unplug the appliance for 5 minutes, then restart. If the code returns, write it down and call a technician.
42C / 44C / 44E Depending on model: communication error between the main board and the compressor inverter board. On some models 44E is listed as an ice room fan error.
Call a technician
Unplug the appliance for 5 minutes, then restart. If the code returns, write it down and call a technician.
43C / 46 / 46Er On some models (service references): communication error with the I/O expander board.
Call a technician
Unplug the appliance for 5 minutes, then restart. If the code returns, write it down and call a technician.
47E On some models (service references): motor locked or over-speed error.
Call a technician
Unplug the appliance for 5 minutes, then restart. If the code returns, write it down and call a technician.
48E On some models (service references): Flex Zone compartment temperature abnormally high.
Call a technician
Make sure the drawer closes fully and is not overloaded with warm food. If it stays high, call a technician.
49E On some models (service references): compressor over-voltage error.
Call a technician
Unplug for 1 minute and restart. Use a dedicated outlet. If it returns, call a technician.
50E / 43 On some models (service references): AutoFill pitcher overflow detected. Empty and reseat the AutoFill pitcher and dry the compartment.
51E-56E On two-compressor models (service references): freezer compressor errors (start failure, inverter fault, position detection, locked rotor, low voltage, over-voltage).
Call a technician
Unplug the appliance for 5 minutes, then restart. If the code returns, write it down and call a technician.
52 / 52C On some models (service references): communication error between the main board and the Wi-Fi module. On two-compressor models 52E is a freezer compressor fault instead (see 51E-56E).
Call a technician
Unplug the appliance for 5 minutes, then restart. If the code returns, write it down and call a technician.
62E / 62C Pantry fan error on models with a pantry drawer.
Call a technician
Check that nothing blocks the pantry vent and that frost is not holding the fan. If it returns, call a technician.
63E / 64E On some models (service references): compressor position detection error (63E) or compressor locked (64E).
Call a technician
Unplug the appliance for 5 minutes, then restart. If the code returns, write it down and call a technician.
73 / 73C On some models (service references): Flex Zone or convertible zone temperature abnormally high, or chill error.
Call a technician
Check that the drawer closes fully. If it returns, call a technician.
77C / 77E Depending on model: internal camera error (Family Hub models with View Inside), or water supply error for the sparkling water tank.
Call a technician
Restart the fridge. For sparkling models, check the water and CO2 supply. If it returns, call a technician.
93E / 94E On sparkling water models (service references): sparkling tank overflow (93E) or water supply to the sparkling tank (94E).
Call a technician
Make sure the water supply is on and restart. If it returns, call a technician.
95E-99E / 96C On two-compressor models (service references): second compressor errors (inverter fault, position detection, locked rotor, low voltage, over-voltage).
Call a technician
Unplug the appliance for 5 minutes, then restart. If the code returns, write it down and call a technician.
oP-Er Option mismatch between the main board and display panel, usually after a board replacement.
Call a technician
This needs a technician to set the board options.
Blinking line codes 1-13 (older models) Older Samsung models without E codes blink a number of segments: 1 ice maker sensor, 2 fridge sensor, 3 fridge defrost sensor, 4 fridge fan, 5 ice maker function, 6 Cool Select sensor, 7 fridge defrost, 8 exit air sensor, 9 freezer sensor, 10 freezer defrost sensor, 11 freezer fan, 12 condenser fan, 13 freezer defrost.
Call a technician
Note which number is blinking and give it to the technician. Fan codes may clear after a full defrost with the fridge unplugged and doors open for several hours.
All icons flashing Self-diagnostic mode after power is restored. Not a fault. Wait a few minutes; the display returns to normal.

What we actually find on Samsung refrigerators in the Denver area

The codes above come from Samsung’s own documentation. This section shows what our technicians found once they opened the machine. Since 2023 we have handled 164 Samsung refrigerator service calls across the Denver metro and Boulder County. Every number here comes from our own job records.

Code Our calls What we found Part we used most
40E 1 Compressor or sealed system. DA92-00592A

The Samsung refrigerator repairs we do most often

Across all 164 Samsung refrigerator calls, with or without a code on the display:

  1. Ice maker: 19 calls
  2. Compressor or sealed system: 12 calls
  3. Control or inverter board: 11 calls
  4. Defrost system: 11 calls
  5. Evaporator or condenser fan: 8 calls
  6. Thermistor or sensor: 8 calls
  7. Door gasket: 2 calls

Recent Samsung refrigerator calls

  • Arvada (80005), September 2026: Samsung refrigerator freezer not freezing. Diagnosis: compressor or sealed system.
  • Longmont (80501), August 2026: Samsung refrigerator not cooling. Repair: defrost system replaced (DA32-10104N).
  • Longmont (80501), June 2026: Samsung refrigerator not starting. Repair: control or inverter board replaced (DA92-00945A).
  • Dacono (80514), June 2026: Samsung refrigerator freezer not freezing. Repair: ice maker replaced.

Samsung refrigerator repairs from $230. Home diagnostic visit from $59, credited toward your repair. Call 720-230-1229.

Source: The Appliance Team service records, 2023–2026. Customer details removed.

Video: Samsung refrigerator control or inverter board repair

Video by Parts Dr

What we see on Denver calls

  • The video shows a control or inverter board repair. It is the #3 refrigerator repair on our calls.
  • The Samsung refrigerator repairs we do most often across the Denver metro and Boulder County: ice maker (19 calls), compressor or sealed system (12) and control or inverter board (11).
  • Recent call: Longmont (80501), August 2026: Samsung refrigerator not cooling. Repair: defrost system replaced (DA32-10104N).

Don’t want to do it yourself? Call 720-230-1229.

What you can safely check yourself

  1. Write down the exact code before resetting anything.
  2. If you see OF OF, turn off demo mode with the button hold in your manual.
  3. Check that the doors close fully and the gaskets are clean and sealing.
  4. Make sure food is not blocking the air vents in the fridge or freezer.
  5. For power codes (83E, 85E, 86E, 88 88), unplug or turn off the breaker for 60 seconds, then restore power.
  6. For 22E, unplug the fridge and leave the doors open for a few hours to melt ice, with food moved to a cooler.

When to call a technician

  • Any sensor, heater or ice maker code: 5E, 8E, 14E, 33E, 39E or 40E.
  • A fan code (21E or 22E) that returns after defrosting.
  • Compressor codes (83E, 84C, 85E, 86E) that return after a power reset, since sealed-system work is not DIY.
  • The fridge or freezer is warming up, whatever the code.

How to prevent this

Many of these breakdowns start with maintenance that was skipped. These guides show what to check, how often, and what happens if you don't:

All appliance maintenance guides →

Frequently asked questions

How do I get my Samsung fridge out of OF OF mode?

OF OF means Cooling Off or demo mode. On most models, press and hold the top two buttons on the left side of the panel for 5-8 seconds until it chimes. Some newer models also need the top right button.

What does 22E mean on a Samsung refrigerator?

22E is a fridge fan error, often caused by ice on the fan or a door left open too long. Samsung suggests unplugging the fridge and leaving the doors open for a few hours, then restarting. If the code returns, the defrost system or fan needs service.

Should I unplug my Samsung fridge to clear an error code?

Only when a step tells you to, such as for power or compressor codes. Samsung advises against clearing codes otherwise, because the stored code helps a technician find the fault.

What does 33E mean on a Samsung refrigerator?

33E is an ice pipe heater error. Samsung lists it as a code that needs service, so note the code and schedule a technician.

Sources: samsung.com, samsung.com, searspartsdirect.com, searspartsdirect.com, searspartsdirect.com, ifixit.com, appliancepartspros.com, mypros.plus, mypros.plus, removeandreplace.com. Codes and meanings can vary by model; check your owner's manual.

720-230-1229
720-230-1229
Call Now Book Online