Samsung Washer Error Codes

Updated November 2026 · By Zach, EPA 608-certified appliance technician, The Appliance Team, Denver CO

Quick answer

Most Samsung washer codes point to a water fill problem (4C/4E/nF), a drain problem (5C/5E/nd), the door not locking (dC/dE/dL/LO/FL), an unbalanced load (UE/Ub/Ur), or too many suds (Sud/Sd). These you can often clear yourself by checking the water valves, cleaning the drain filter, redistributing the load, or using less HE detergent. Motor, heater, sensor and communication codes (3C/3E, HC/HE, tE, 8E, AE/AC, PE/PC) usually need a technician.

Samsung front-load and top-load washers show a short code when something stops the cycle. Many codes have several versions (for example 4C on newer models and 4E on older ones) that mean the same thing. Some codes also mean different things on different models, so check your owner's manual if a code does not match what you see. Before any hands-on check, unplug the washer and turn off the water valves. The list combines the manufacturer's own code lists with service manuals and repair-parts references. Rows marked "on some models" or "service references" come from those repair sources, so the meaning can vary by model; check your owner's manual when in doubt.

Samsung Washer error codes and what they mean

Code What it means What to try
4C / 4E / nF / 1 4C Water is not filling correctly. Open both water valves fully and straighten any kinked hoses. Make sure hot goes to hot and cold to cold. With the washer unplugged and water off, clean the small screen filters where the hoses connect. Keep the drain hose only 6-8 inches into the standpipe so it does not siphon.
4C2 / 4E2 / CE / nF1 / 14C2 Hot/cold error: the cold supply is very hot, usually because the hoses are swapped. Turn off the water and reconnect the hoses hot to hot and cold to cold (often red to red, blue to blue).
5C / 5E / SC / SE / nd / 1 5C Washer is not draining, or draining too slowly. Unplug the washer. Check the drain hose for kinks or clogs. On front-load models, drain and clean the pump filter behind the small lower front panel (have towels ready). If it still will not drain, the pump may have failed.
OE / OC / 0E / 0C / OF / 1 OC / 1 0C Overflow: too much water in the tub.
Call a technician
Turn off the water supply, then power the washer off and on. Check that the drain hose is not pushed too far into the standpipe. If water keeps filling with the washer off, the inlet valve is likely stuck open.
LE / LC / 1E / 1C / LC1 / LE1 / 1 1C / 1 LC / 11E Water level or leak error: moisture where it should not be, or a faulty water level sensor.
Call a technician
Look for leaks at hoses, the door seal and the drain filter cap. Run an empty cycle with no detergent. If suds appear, use less HE detergent. If the code returns without suds or leaks, request service.
dC / dE / dL / LO / L0 / FL / dS / d5 / dE1 / dE2 / dC1 / 1 dC / 1dC1 Door error: the door is not detected as closed and locked. Make sure no clothing is caught in the door, then close it firmly. Check the latch for damage. A broken latch or door lock needs replacement. Note: on some models dC means an unbalanced load instead.
ddC / dC3 Add Door error (models with a small Add Door in the main door): the Add Door is not detected as closed and locked. Close the Add Door firmly until it clicks and make sure nothing is caught in it. If the Add Door or its latch is damaged, it needs service.
1dC4 FlexWash models: the small rubber button beside the upper door latch is missing. Look for the rubber button next to the upper latch. Replacing the missing button clears the error.
SDC / 5DC Detergent drawer error: the dispenser drawer is not fully closed. Push the detergent drawer in until it clicks. Wipe away detergent buildup that keeps it from closing.
UE / Ub / U6 / Ur / dc / 1 Ub / 1U6 Unbalanced load. Ur means the washer is retrying; the others stop the cycle. Untangle and spread out the laundry, or remove a heavy item, then restart. Wash bulky items like comforters alone. If it happens with normal loads, check that the washer is level and the feet are locked.
Cb / C6 Calibration mode: the washer is recalibrating how it senses the load. Not a fault. Make sure the drum is empty and let calibration finish. Your manual explains how to run it again if it was interrupted.
Sud / Sd / SUdS / 5UD / 5d / 5Ud5 / 1 SUD Too many suds. The washer pauses to let them settle. Let the cycle resume on its own. Use only HE detergent and measure carefully. Denver's hard water can lead people to overdose detergent, which makes this worse.
3C / 3E / E3 / 1 3C / 3E1 / 3E2 / 3E3 / 3E4 Motor error. On some models 3E is a voltage error instead.
Call a technician
Power off for 2-3 minutes, then restart the cycle. Do not overload the drum. If the code returns, the motor, wiring or control board needs diagnosis.
bE / 6E Motor speed sensor error on some models. (bE2 and 6E2 are stuck-button codes, listed separately.)
Call a technician
Power off for 2-3 minutes, then restart the cycle. If it returns, the motor sensor, wiring or control board needs diagnosis.
HC / HE / HE1 / Hr / 1 HC / H1 Heater error (front-load models with an internal heater).
Call a technician
Power off for 2-3 minutes and restart. If it repeats, a technician should test the heater and its wiring.
HE1 (top-load models) Heater error on top-load models with a built-in heater. A failed heating element, loose wiring or a water level sensor problem can cause it.
Call a technician
Unplug the washer for a few minutes, then plug it back in and run a cycle. If HE1 returns, a technician should test the heater, wiring and water level sensor.
tE / tE1 / tE2 / tE3 / tC / tC1 / tC2 / tC3 Water temperature sensor error.
Call a technician
Power off for 2-3 minutes and restart. If it repeats, the sensor or its connection needs service.
PE / PC / PE1 / PC1 Clutch position or clutch sensor error (top-load models).
Call a technician
Power off for 2-3 minutes and restart. If it returns, the shifter or clutch assembly needs service.
8E / 8C / BE / BC Vibration (MEMS) sensor error. On some models BE2/8E2 means a stuck button.
Call a technician
Power off for 2-3 minutes and restart. If it repeats, request service.
8E1 / 8E2 / 8C1 / 8C2 / BE1 / BC1 / BC2 Vibration (MEMS) sensor error variants. On some models 8E2 or BE2 means a stuck button instead, so check your manual.
Call a technician
Power off for 2-3 minutes, then restart the cycle. If it repeats, request service.
bE2 / 6E2 / E2 / bE1 / bE3 / 12E / 14E / 18E A control panel button is stuck or held down. Samsung lists bE1, bE2 and bE3 as button issues; service references describe bE1 as the power button held for more than about 12 seconds and bE3 as a main relay or button fault. 12E, 14E and 18E are older versions of these codes. Turn the washer off and press each button, working it back and forth. If a button is damaged or the code returns, the control panel needs service.
AE / AC / AE4 / AC6 / 1 AC / 1AC6 / 13E Communication error between the control boards.
Call a technician
Power off for 2-3 minutes and restart. A repeat usually means a wiring or board problem.
AE5 / AE6 / AE8 / AEb / ACb / AC3 / AC4 / AC5 / AC7 Communication error variants. AE5 points to the link between the main board and the display module; AE6 (like AC6) to the link with the motor inverter board.
Call a technician
Power off for 2-3 minutes, then restart the cycle. A repeat usually means a wiring or board problem.
AE3 Demand-response (DR Ready) modem communication error on models with that module.
Call a technician
Power off for 2-3 minutes, then restart the cycle. If it continues, request service.
9C1 / 9E1 / 2E / UC / PF Voltage error: irregular power. PF means power was interrupted. Plug the washer directly into its own outlet with no extension cord. If it keeps happening, have the outlet and circuit checked.
9C2 / 9E2 / 19C1 / 19C2 Voltage error: the supply voltage is too low or irregular (same family as 9C1/9E1). Plug the washer directly into its own outlet with no extension cord or power strip. If it keeps happening, have the outlet and circuit checked.
9C6 / 9C7 / 9C8 Circuit or overcurrent error inside the washer.
Call a technician
Power off for 2-3 minutes, then restart the cycle. If it returns, request service. Do not open the washer's electrical panels.
SF / 5F / SF1 / SF2 / SF3 / 5F1 / 5F2 / 5F3 / 1 SF / IE System error from the electronic control board.
Call a technician
Power off for 2-3 minutes, then restart the cycle. If it returns, the control board or its wiring needs service.
Sr / 5r System relay error on the control board.
Call a technician
Power off for 2-3 minutes, then restart the cycle. If it returns, request service.
7E SilverCare error on models with the SilverCare (silver ion) feature.
Call a technician
Power off for 2-3 minutes, then restart the cycle. If it returns, request service.
CL Child Lock is on. If the door was opened with water at an unsafe level, the washer drains the tub. Turn Child Lock off using the button combination in your manual, or turn the washer off and on.
dn Software download in progress. The controls will not respond. Leave the washer powered on; the update takes about 15 minutes. If dn shows for more than 30 minutes and Wi-Fi is working, request service.
4E1 / 4Ed Water temperature issue. On some models the incoming water is too hot for the selected cycle (for example Wool or delicates). Turn off the water and check that the hot and cold hoses are not swapped. Choose the correct cycle and restart. If it returns with hoses correct, call a technician.
6E (some models) On some models Samsung lists 6E as the water heater not working (on other models 6E is a motor speed sensor code, listed above).
Call a technician
Restart on a cold wash. If 6E returns on hot or warm cycles, the heater needs testing by a technician.
8E (some models) On some models Samsung lists 8E as an over-current or current error rather than a vibration sensor error.
Call a technician
Unplug the appliance for 5 minutes, then restart. If the code returns, write it down and call a technician.
E1-E9 / EA / EB / EC (older models) Older Samsung washers (mostly UK/EU and early US models) use E codes. Per Samsung UK: E1 water supply, E2 drainage, E3 overflow, E4 unbalanced load, E5/E6 water heater, E7 water level sensor, E8 water temperature (hot water on a cold cycle), E9 low water level or leak, EA/EB motor, EC temperature sensor. On many newer US models E2 instead means a jammed button and E3 a motor error (see above).
Call a technician
Follow the steps for the matching newer code: for E1 check the water valves, for E2 clean the drain filter, for E4 redistribute the load, for E8 check that the hoses are not swapped. Heater, motor and sensor codes need a technician.
9H1 / PH1 / Plo / UC Power error: the supply voltage is too high, too low or fluctuating. PH1 and Plo are older versions of 9E1/9E2. Plug the washer directly into a grounded outlet, not an extension cord. Reset the breaker. If it keeps happening, have an electrician check the circuit.
3CP Electronic control issue listed by Samsung UK on some models.
Call a technician
Unplug the appliance for 5 minutes, then restart. If the code returns, write it down and call a technician.
HE2 Dryer heater not working, on Samsung washer-dryer combo models.
Call a technician
Unplug for 5 minutes and try the dry cycle again. If HE2 returns, the dry heater needs service.
HE3 Steam function not working normally, on steam models.
Call a technician
Make sure the water supply is on and restart. If HE3 returns, call a technician.
FE (washer-dryer combos) Fan error on Samsung washer-dryer combo models (drying fan).
Call a technician
Unplug the appliance for 5 minutes, then restart. If the code returns, write it down and call a technician.
HOT The washer is too hot inside. Not a fault: the door stays locked until it cools. Wait for the drum to cool. The door unlocks by itself.
t1 / t2 / tSt / EE2 The washer is in a test mode. Not a fault. Turn the washer off and back on. If it stays in test mode, unplug it for a few minutes.
0 (Drum Clean reminder) A reminder to run Drum Clean or Self Clean. Not a fault. Run a Drum Clean cycle with the drum empty.
6F Samsung lists 6F but says it is not an error code. Turn the washer off and on. If it stays, check the manual for your model.
18:8J Model option error: the control board is not set up for this model, usually after a board replacement.
Call a technician
This needs a technician to program the board.
nG / nH / nS Repair references list these on some models with Smart Install: nG Smart Install failed, nH hot and cold hoses reversed, nS door not secured. For nH, swap the hoses hot to hot and cold to cold. For nS, close the door firmly. Retry Smart Install from the app.
PoF / Pb Repair references list PoF as power failure compensation (the washer remembers the cycle) and Pb as power lost while running. Press Start to resume. If the power keeps dropping, check the outlet and breaker.
NC (some models) Repair references list NC on some models as a filter not inserted correctly. Unplug the washer and check that the drain or lint filter is fully inserted and tight.
tE4 / TC4 Repair references list these as the motor inverter board (IPM) running too hot.
Call a technician
Unplug the appliance for 5 minutes, then restart. If the code returns, write it down and call a technician.
tH / tUH / TCH Repair references list these on some models as humidity or drying sensor faults (washer-dryer combos).
Call a technician
Unplug the appliance for 5 minutes, then restart. If the code returns, write it down and call a technician.
8CA1-8CA4 / 8CB1-8CB4 Repair references list these as vibration (MEMS) sensor wiring or position faults, front or rear sensor.
Call a technician
Unplug the appliance for 5 minutes, then restart. If the code returns, write it down and call a technician.
Auto off error / AO Repair references describe this as the washer not powering off after a cycle because of an auto-off relay fault.
Call a technician
Unplug the appliance for 5 minutes, then restart. If the code returns, write it down and call a technician.

What we actually find on Samsung washers in the Denver area

The codes above come from Samsung’s own documentation. This section shows what our technicians found once they opened the machine. Since 2023 we have handled 121 Samsung washer service calls across the Denver metro and Boulder County. Every number here comes from our own job records.

The Samsung washer repairs we do most often

Across all 121 Samsung washer calls, with or without a code on the display:

  1. Shock absorbers or suspension: 14 calls
  2. Control or display board: 10 calls
  3. Drain pump: 7 calls
  4. Door or lid lock: 3 calls
  5. Clogged filter or foreign object: 2 calls
  6. Drum bearings or spider: 2 calls

Recent Samsung washer calls

  • Lafayette (80026), October 2026: Samsung washer leaking. Repair: shock absorbers or suspension replaced (DC97-16350U).
  • Longmont (80501), August 2026: Samsung washer not draining. Repair: drain pump replaced (DC97-20621C).
  • Longmont (80504), August 2026: Samsung washer stopping mid-cycle. Diagnosis: control or display board (part DC92-01531C).
  • Denver (80211), July 2026: Samsung washer making noise. Repair: shock absorbers or suspension replaced.

Samsung washer repairs from $200. Home diagnostic visit from $59, credited toward your repair. Call 720-230-1229.

Source: The Appliance Team service records, 2023–2026. Customer details removed.

Video: Samsung washer error codes

Video by Parts Dr

What we see on Denver calls

  • An error code points to the system that reported the fault, not always to the part that failed.
  • The Samsung washer repairs we do most often across the Denver metro and Boulder County: shock absorbers or suspension (14 calls), control or display board (10) and drain pump (7).
  • Recent call: Lafayette (80026), October 2026: Samsung washer leaking. Repair: shock absorbers or suspension replaced (DC97-16350U).

Don’t want to do it yourself? Call 720-230-1229.

What you can safely check yourself

  1. Unplug the washer and turn off both water valves before any hands-on check.
  2. Make sure both valves are fully open, the hoses are not kinked, and hot and cold are not swapped.
  3. Clean the inlet hose screens and, on front-loaders, the drain pump filter behind the lower front panel.
  4. Check the door for caught clothing and make sure it closes and latches firmly.
  5. Redistribute the load and wash bulky items alone; check that the washer sits level.
  6. Use only HE detergent and measure it. Too much causes suds and drain codes.
  7. For most other codes, power off for 2-3 minutes, then restart the cycle once.

When to call a technician

  • A motor, heater, sensor, clutch or communication code (3C, HC, tE, PE, 8E, AE) keeps coming back after a reset.
  • The washer will not drain even after the pump filter and hose are clear.
  • Water keeps filling with the washer off, or you see an active leak.
  • The door lock or latch is broken or the door will not lock.
  • You hear grinding, banging or a burning smell during the cycle.

How to prevent this

Many of these breakdowns start with maintenance that was skipped. These guides show what to check, how often, and what happens if you don't:

All appliance maintenance guides →

Frequently asked questions

How do I reset a Samsung washer error code?

Turn the washer off, unplug it or switch off the breaker for 2-3 minutes, then power it back on and restart the cycle. A reset clears the display, but if the cause is still there, the code will come back.

What is the difference between 4C and 4E on a Samsung washer?

They mean the same thing: the washer is not filling with water correctly. Newer models use codes ending in C, and older models use codes ending in E.

Why does my Samsung washer keep showing UE or Ub?

The load is out of balance, often because a single heavy item or a tangled load shifts to one side. Spread the laundry out and make sure the washer is level. If it happens with normal loads, the suspension may need service.

Can the same code mean different things on different Samsung washers?

Yes. Samsung notes that dC can mean a door error or an unbalanced load, and 3E can mean a motor or voltage error, depending on the model. Your owner's manual lists the codes for your exact model.

Sources: samsung.com, samsung.com, searspartsdirect.com, searspartsdirect.com, searspartsdirect.com, appliancepartspros.com, samsung.com, samsung.com, mypros.plus. Codes and meanings can vary by model; check your owner's manual.

720-230-1229
720-230-1229
Call Now Book Online