washer
Replaced the suspension rod.
Repaired · 90-day warrantySame-day washer repair across Lochbuie, including Silver Peaks, Lochbuie Station, Bella Vista. All brands, written quote before any work.
We fix washing machines of all major brands across Lochbuie, and we can often get there the same day. You get a written quote after diagnosis, the service call (from $59) disappears from the bill if you approve the repair, and every repair carries a 90-day parts and labor warranty.
A washer in a Lochbuie home pulls its water from the town's groundwater wells, and the first thing that water meets is a pair of small mesh screens at the inlet valve. Grit and mineral deposits collect there and slow the fill, which can trigger error codes on newer machines. Since Lochbuie publishes no hardness figure, we pull and inspect those screens on every visit.
Most washers in Silver Peaks, Lochbuie Station and Bella Vista went in after 2016, so they are mid-life at most. When a young washer acts up, the cause is often something done on move-in day: a drain hose pushed too deep into the standpipe so it siphons, a fill hose kinked against the wall, or shipping bolts never removed from a front-loader. These are quick fixes once someone finds them, and they save a part that did not need replacing.
The original Spacious Living neighborhood and other manufactured homes in town present a tighter job. Washers often sit in a compact closet, sometimes stacked with the dryer, with little room to pull the machine out. Floors in older manufactured homes can flex, so an unbalanced spin shakes more than it would on a slab. We bring the tools to work in close quarters and check that the machine is level and the floor beneath it is dry.
Some Lochbuie ranch homes have basements, and a washer down there often drains into a laundry sink or a sump-style pump. A slow drain in that setup can look like a washer fault, complete with error codes and water left in the drum. We test the machine's own pump and pressure switch first, then tell you plainly whether the problem sits in the washer or in the drain line it empties into. That saves you from paying for a pump the washer never needed.
Clogged inlet screens from well-water sediment are a frequent cause here, followed by a failing inlet valve. We clean or replace the screens and test the valve solenoids.
Leftover shipping bolts, an unlevel installation or a flexing floor are common on newer installs. We check for bolts, level the feet and look at suspension parts.
A drain hose pushed too far into the standpipe can siphon water out. We reset the hose height and confirm the pump and valve work normally.
A clogged pump filter or failed drain pump leaves water behind, and the lock stays engaged for safety. We drain it safely and repair the cause.
Loose hose connections, a torn door boot or a cracked detergent dispenser are typical. We trace the leak in the tight space and replace what failed.
A worn lid switch, broken coupler, failed motor or shift actuator can stop movement. We test the switch and drive parts in order.
We counted 18 washer repair jobs in Lochbuie and nearby Brighton, Commerce City in our job records. This is what those jobs needed and which brands they were, so you can see what is likely wrong with yours before we arrive.
Brands we repaired most: Samsung (2), KitchenAid (1), GE (1), Whirlpool (1), Frigidaire (1).





Replaced the suspension rod.
Repaired · 90-day warrantyCleaned the door seal and washer with a specialized cleaner.
Repaired · 90-day warrantyReal jobs from our records. Customer details are never shown.
Washer Repair starts at $179*.
| Repair | From* |
|---|---|
| Lid lock or door latch | $179+ |
| Drain pump | $179+ |
| Door boot seal | $259+ |
| Drive motor or control board | $259+ |
| Bearings or transmission | $479+ |
* Labor only; parts are quoted separately.
See full price list →Whirlpool, Maytag, Samsung, LG and GE fill most Lochbuie laundry rooms, and we repair each. We also service Speed Queen, Electrolux, Bosch and Miele, and compact or stacked units common in manufactured homes. If your washer is new enough to still be under factory warranty, we will tell you before quoting.
For small Lochbuie businesses and shared laundry rooms, we repair commercial and coin-operated washers.
Commercial laundry repair →A washer typically lasts 10 to 13 years. Inlet valves, pumps, switches, lock assemblies and suspension parts are usually worth replacing. Major tub, bearing or motor work on an older unit is where the 50% rule matters: if the repair approaches half the price of a new washer, consider replacing. That calculation rarely tips toward replacement in young Silver Peaks homes.
4.9 from 686 reviews · 541 on Google
“Zack is great! He fixed my washer leak a year ago. In the meantime, he also cleaned the back of my fridge from dust. This time it was the dryer. The drum was not spinning. Zack spined the drum by hand and he said is the motor. He made a very quick diagnosis. He took the dryer apart and he found few pieces in the engine that were broken. He replaced the engine and everything works great again. The price was also very reasonable. I am very satisfied with Zack's professional work and I highly recommend him. He really knows what he's doing.”
“Serhii was fantastic! He was friendly, knowledgeable, efficient, and kept us informed throughout the entire process. He quickly diagnosed the issue with our washer, ordered the necessary parts, and returned just two days later to complete the repair. The service was professional and seamless from start to finish. We will definitely use this company again in the future if needed”
“I had an excellent experience getting my washer machine fixed. Denys The technician quickly identified the problem and repaired it efficiently. The service was professional, honest, and reasonably priced.”
It can clog the inlet screens and wear on the valve over time. The town lists no hardness figure, so we look at the screens on every call and clean or replace them as needed.
Yes. We work in compact closets in Spacious Living and other manufactured homes, and we can usually repair the unit without fully unstacking it.
Probably not. Young washers usually have a single failed part or a loose connection. If the factory warranty still applies, we will tell you.
An unlevel install, missing shipping bolt removal, worn shocks or a flexible floor are the usual reasons. We check each and level the machine.
Yes. We cover every neighborhood in town, on both the Weld and Adams county sides.
We start with a service call from $59, which is waived if you go ahead with the repair. You get a written quote before we do any work.
Standing water in the drum or a machine that will not spin? Book now and we will bring common washer parts on the first visit.