oven
Replaced the oven light bulb.
Repaired · 90-day warrantySame-day oven repair across Aurora, including Original Aurora, Hoffman Heights, Heather Gardens. All brands, written quote before any work.
From Hoffman Heights to Tallyn's Reach, The Appliance Team repairs gas, electric, convection and wall ovens of every major brand, and same-day appointments are often open. A technician tests the oven and gives you a written quote before starting. The service call (from $59) is waived when you approve the repair, and parts and labor carry a 90-day warranty.
A lot of Aurora ovens are hitting middle age at the same time. The subdivisions that went up in southeast Aurora in the 1990s and 2000s came with builder-grade ranges and wall ovens, and many are now 15 to 25 years old. That is when bake igniters weaken, temperature sensors drift and control boards start throwing codes. Elevation adds a wrinkle: across Aurora, from about 5,300 to over 6,200 feet, recipes behave differently even in a healthy oven.
Builder-grade ovens in Saddle Rock, Tallyn's Reach and the neighborhoods around Southlands tend to fail in predictable ways. On gas models, the bake igniter weakens until it glows but cannot open the gas valve, so the oven never heats. On electric models, the bake element burns through or the temperature sensor drifts. Control boards on these units also wear out. Most of these parts are still available, and replacing them often costs far less than a new oven.
Before we replace anything for poor baking, we put our own thermometer in the oven and check how close it holds to the setting. Water boils around 200 to 202°F in Aurora, depending on which part of the city you are in, so many recipes need altitude adjustments. If the oven holds temperature, the fix is in the recipe. If it is off, we track down the cause.
Older ranches in Original Aurora and Hoffman Heights more often have freestanding ranges than wall ovens, and their gas and electrical hookups can date back decades. Remodeled homes in the southeast sometimes add double wall ovens or convection models from Bosch, KitchenAid or Thermador. Gas ovens are set up for altitude at installation. If the bake flame is yellow or leaves soot, stop using it and have it inspected. Gas valve and orifice work is not a do-it-yourself job.
On gas ovens, a weak igniter is the leading cause. On electric ovens, a failed bake element or a relay on the control board. We test amperage and resistance to confirm before replacing parts.
The bake element or burner may be cycling too long because of a drifting sensor, or the broil element may be failing. Convection fans that stop running also cause uneven baking.
Error codes often point to the temperature sensor, the door lock or the control board. We read the code and test the related part rather than replacing the board first.
Turn the oven off and ventilate. A faint smell during ignition can be normal, but a persistent smell needs a technician to check the valve, igniter and connections.
Worn hinges or a damaged gasket let heat escape, slow preheating and make the oven run hot outside. We replace hinges and gaskets on most models.
A drifting temperature sensor or a stuck relay on the control board can keep the element or burner on too long. We check the sensor's resistance against spec at room temperature and test the board's relays before replacing anything.
From our job records: 25 oven repairs completed in Aurora since January 2024.
We counted 53 oven repair jobs in Aurora and nearby Denver in our job records. This is what those jobs needed and which brands they were, so you can see what is likely wrong with yours before we arrive.
Brands we repaired most: Whirlpool (7), Thermador (3), GE (2), Viking (2), Dacor (2), Samsung (2).






Replaced the oven light bulb.
Repaired · 90-day warrantyReplaced the heating element.
Repaired · 90-day warrantyReplaced the upper cooling fan assembly and safety thermal fuse.
Repaired · 90-day warrantyOven bulb replacement
Repaired · 90-day warrantyHeating element replace
Repaired · 90-day warrantyUpper cooling fan assembly replacement, safety thermal fuse replacement
Repaired · 90-day warrantyAdjustment power between control board and heater, checking
Repaired · 90-day warrantyIgniter replace
Repaired · 90-day warrantyOven bake ignitor assembly replacement, Dishwasher heating element replacement, dishwasher calibration
Repaired · 90-day warranty2 switchers replacement
Repaired · 90-day warrantyReal jobs from our records. Customer details are never shown.
Oven Repair starts at $179*.
| Repair | From* |
|---|---|
| Bake or broil element | $179+ |
| Oven igniter | $179+ |
| Temperature sensor | $179+ |
| Convection fan motor | $259+ |
| Control board | $259+ |
* Labor only; parts are quoted separately.
See full price list →We repair ovens from GE, Whirlpool, Frigidaire, Samsung, LG, Maytag, KitchenAid and Kenmore, which cover most Aurora builder packages, along with Wolf, Thermador, Viking, Bosch, Miele, Monogram, JennAir and Fisher & Paykel. Builder-grade GE and Whirlpool ovens share many parts across model years, which often keeps repair costs reasonable.
For Aurora restaurants on Havana Street and East Colfax, and for hotel and hospital kitchens near the airport and the Anschutz Medical Campus, we also repair commercial convection and deck ovens.
Restaurant equipment repair →A well-made oven often runs 13 to 15 years or more. Southeast Aurora's original builder ovens are frequently past that, yet igniters, elements, sensors and hinges are still affordable enough that repair usually pays. Replacement becomes reasonable when a control board fails on an older basic model and the quote nears half the cost of a new oven, or when the cavity enamel is badly damaged. Remodeled kitchens with premium wall ovens almost always favor repair.
4.9 from 686 reviews · 541 on Google
“Great service! Serge was prompt, polite, and efficient. He explained what was needed and had the part with him to repair my oven. Confirmed the appointment and let me know when he was on his way. Left everything clean. Much appreciated!”
“Volodymyr was extremely polite, professional, and efficient. Took care of my oven in no time- despite the mess the previous owner and myself left for him with multiple stripped/missing fasteners.”
“Oleksii was knowledgeable and fixed my oven He was very nice and comfortable having him in my home. I recommend this company and this specific repairman.”
Often it is. Igniters, elements, sensors and even control boards are usually available for builder-grade ovens from the 1990s and 2000s. We test the oven and give you a written quote so you can decide.
Aurora sits between roughly 5,300 and 6,200 feet, and water boils around 200 to 202°F. That changes how batters rise and how moist foods cook. We can confirm your oven holds temperature so you know whether to adjust the recipe.
Yes. We repair single and double wall ovens, including convection and combination models. Many need to slide out of the cabinet, and we protect the cabinetry while we work.
Yes, but stop using it first and ventilate the kitchen. If the smell is strong, leave the house and call Xcel Energy. Once it is safe, we test the valve, igniter and connections and repair the cause.
A weak bake igniter is the usual reason. As it ages it glows longer before drawing enough current to open the gas valve, so preheat drags and eventually the oven stops lighting. We measure the igniter's current draw and replace it when it falls below the maker's spec.
Oven not heating or showing an error? Call or book now, and you will see a written price before any part goes in.
All photos are from our own oven and range jobs in Aurora, with a caption saying what was wrong or what we did.











| Oven or range | What the customer saw | What we found or did |
|---|---|---|
| Gas oven | Slow to heat or not lighting | Replaced the bake igniter |
| Electric oven | Not baking | Replaced the bake element |
| Electric range | Oven would not turn on | Diagnosed and repaired |
| Gas range | Burner igniter not working | Burner ignition repair |
| KitchenAid range | Broken glass top | Glass top replacement |
| Whirlpool range | Cracked glass top | Glass top replacement |
| Whirlpool wall oven | Malfunctioning | Control diagnosis |
| Samsung oven | Control board problem | Control board repair |
Igniters were the most common Aurora oven repair in these jobs. A weak igniter still glows but doesn’t draw enough current to open the gas valve, so the oven heats slowly or not at all. We measure the igniter’s current rather than guessing, replace it and confirm the oven lights within about a minute.
A burnt bake element, a failed temperature sensor or a relay on the control board. A visible break or blister on the element confirms it, but we meter it anyway.
Two Aurora calls were cracked glass tops. Stop using a cracked cooktop: spills can reach the elements and wiring. We replace the glass on most models.
Blank displays, error codes and ovens that won’t turn on often trace to a control board, a touchpad or a loose connection. We check connections and supply voltage before replacing a board.
Dirty or cracked electrodes, wet burners or a weak spark module. Dry the burner caps and bases completely; if the burner still won’t light, it needs a technician.
Newer Aurora homes often have Samsung, LG, GE and Whirlpool ranges with glass tops and electronic controls, plus wall ovens in larger kitchens. Older homes near Colfax and Hoffman Heights still have gas ranges with simple controls that are very repairable. Many of our Aurora calls are gas ovens, so we leak-test every gas connection after a repair and check the flame.
Ranges and wall ovens usually last 15 years or more. Igniters, elements, sensors, switches and glass tops are all worth replacing; a repair is almost always cheaper than a new range plus installation.
GE, Whirlpool, Samsung, LG and Frigidaire make up most Aurora ranges, with KitchenAid, JennAir, Bosch and Viking in larger kitchens. GE and Whirlpool gas ovens most often need igniters; Samsung and LG ranges more often need control boards, touchpads and glass tops; Viking and other pro-style ranges need igniters, spark modules and door parts.
We confirm the problem, check power and gas supply, read any error code and test the suspected part: igniter current on gas ovens, element and sensor resistance on electric ovens, inputs and outputs on control boards. You get the price before work begins. After the repair we heat the oven and check that it reaches and holds temperature, and after any gas repair we leak-test the connections.
If you smell gas, see sparks or arcing from an element, or the oven won’t turn off, turn it off at the breaker or gas valve and call. For a gas smell, call your gas utility first.
Glass tops crack from impact and from thermal shock. Lift heavy pots instead of sliding them, don’t set a hot lid face-down on a cool part of the glass, and clean sugary spills while the top is still warm, because melted sugar can pit the glass. If you see a crack, stop using that range until the top is replaced.
Aurora sits above 5,400 feet. Ovens heat the same, but recipes and baking times behave differently than at sea level, and gas ovens are adjusted for altitude. If your oven reaches the set temperature but food takes longer, it may be the recipe, not the oven. We check the actual temperature with a probe before replacing a sensor.
Every oven and range repair comes with a 90-day parts and labor warranty. If the same problem returns within that time, we come back and fix it at no charge, and we always explain what we replaced and why it failed.
The home service visit starts from $59 and repairs start from $150, parts and labor included. Every repair has a 90-day parts and labor warranty.