On a Whirlpool electric range, an oven that does not heat almost always has a failed bake element, a bad oven temperature sensor or a control board problem. On a Whirlpool gas range, a weak bake igniter is the classic cause. In our Denver-area calls the bake element and the igniter were the parts we replaced most. If the oven heats but stops at the same temperature every time, the sensor or the board is the likely cause.
Whirlpool ranges and wall ovens are everywhere in Denver-area kitchens. Since January 2024 our technicians have taken more than 20 Whirlpool oven calls where the oven did not heat, heated slowly or stopped climbing, from Longmont and Parker to Englewood, Louisville and Denver. Here is what to check and what we found.
Checks you can do yourself
- Electric range: look at the bake element. A break, a blister or a burned spot on the lower element means it has failed. Some ovens have a hidden element under the floor panel that you cannot see.
- Gas range: watch the igniter. Start Bake and look through the slots in the oven floor. A good igniter glows bright orange and the burner lights within about a minute. A glow with no flame means the igniter is weak.
- Check the breaker. Electric ranges use a double breaker. If one half trips, the clock may work but the oven will not heat. On one Denver call the problem was the power connection.
- Check the settings. Make sure the oven is not in Sabbath mode, Control Lock or Delay Bake.
- Note the temperature where it stops. If it always stops around the same number, tell the technician.

What we found on Whirlpool oven calls
| Date | City | Problem | What we found or did |
|---|---|---|---|
| Oct 2026 | Longmont | Gas oven not heating | Replaced the bake igniter |
| May 2026 | Parker | Oven not heating | Replaced the heating element |
| Mar 2026 | Longmont | Stops at 395°F, slow to heat | Diagnosed |
| Feb 2026 | Louisville | Double oven, lower oven not heating | Diagnosed |
| Jan 2026 | Aurora | Will not heat past 305°F | Diagnosed |
| Jun 2025 | Aurora | Oven not heating | Bake element and oven sensor |
| May 2025 | Arvada | Burned cooktop element and oven problem | Replaced the oven control board |
| May 2025 | Denver area | Wall oven not heating | Replaced the board and the thermostat |
| Apr 2025 | Denver | Gas oven not heating | Replaced the igniter |
| Mar 2025 | Longmont | Oven not heating | Replaced the bake element |
| Dec 2024 | Denver | Stove not heating | Repaired the power connection |
| Oct 2024 | Englewood | Shows 350°F, then stops heating | Replaced the heating element |
| Jan 2024 | Denver | Gas oven not turning on | Replaced the igniter |
Electric ovens: element, sensor and board
The bake element is the most common failure on Whirlpool electric ovens. Sometimes you can see the break, sometimes it fails inside. If the oven heats but stops at a fixed temperature, the problem is usually the oven sensor or the control board instead. On one Aurora call the oven needed both a new bake element and a new sensor; on an Arvada range the oven control board was replaced.

Gas ovens: the bake igniter
Whirlpool gas ovens use a hot-surface igniter that must draw enough current to open the gas valve. As it ages it still glows, but not hot enough, so the oven does not light or takes a very long time to preheat. We replaced bake igniters in Longmont and Denver. On a double-oven range, each oven has its own igniter or element, so one oven can fail while the other works.

From the technician
“With Whirlpool electric ovens, if the oven doesn’t heat at all, I start with the bake element. If it heats and then stops at the same number every time, I check the sensor and the board. On gas, a slow or no preheat is almost always the igniter. Don’t keep restarting it; let us check it.” — Zach, technician at The Appliance Team

Repair cost and booking
Our diagnostic visit is from $59 for homes, and the fee is credited toward the repair if you go ahead. The technician tells you the price before any work starts. We work in 52 Denver-area cities.
- Call 720-230-1229 and tell us the model and whether the range is gas or electric.
- See our Whirlpool oven repair page, the Whirlpool oven error codes or the general oven not heating guide.
How to prevent this
Many of these breakdowns start with maintenance that was skipped. These guides show what to check, how often, and what happens if you don't:
Questions we hear on Whirlpool oven calls
Why is my Whirlpool oven not heating?
On electric models, usually the bake element, the oven sensor or the control board. On gas models, a weak bake igniter. A tripped breaker can also leave the display on with no heat.
Why does my Whirlpool oven stop heating at a certain temperature?
A faulty oven temperature sensor or a control board problem. Replacing the element or igniter alone will not fix it.
Why is only one oven heating on my Whirlpool double oven?
Each oven has its own element or igniter. The one that does not heat usually has a failed element or igniter of its own.
Is it worth fixing a Whirlpool oven that won’t heat?
Usually yes. A bake element, igniter or sensor is a moderate repair. Our technician tells you the price before starting.