A Samsung washer that will not drain almost always has a problem in the drain pump: it is clogged with debris or it has failed. A 5C (or SC, ND) code on the display means the washer could not drain in time. Clean the drain filter behind the small panel at the bottom front (front-loaders), check the drain hose, and if the water still stays, the pump needs to be cleaned or replaced. On our Samsung calls around Denver, the drain pump was the part we replaced most.
Samsung washers are among the most common machines we work on in Denver-area laundry rooms. Since January 2024 our technicians have taken more than 20 Samsung washer calls where the washer would not drain, drained slowly or stopped with a drain code, from Arvada and Longmont to Erie, Evergreen and Brighton.
Checks you can do yourself
- Front-loaders: clean the drain filter. Open the small panel at the bottom front. Pull out the short emergency drain tube first and drain the water into a shallow pan, then unscrew the filter. Socks, coins and lint are the usual finds.
- Top-loaders: check the hose and drain. Make sure the drain hose is not kinked and the standpipe is not clogged.
- Do not overload. On one Louisville call the washer was so overloaded that it stopped with the tub full of water. After leveling and a calibration it worked normally.
- Reset and run Drain/Spin. Unplug for a few minutes, then run Drain/Spin only. Listen for the pump.

What we found on Samsung “not draining” calls
| Date | City | Problem | What we found or did |
|---|---|---|---|
| Aug 2026 | Longmont | Not draining | Drain pump needed to be replaced |
| Jun 2026 | Arvada | 5C code | Replaced the drain pump |
| Apr 2026 | Brighton | Beeping mid-cycle, water left inside | Replaced the drain pump and the shock absorbers |
| Feb 2026 | Louisville | Tub full of water, not draining | Heavily overloaded; leveled and calibrated the washer |
| Nov 2025 | Erie | Draining slowly | Drain pump needed to be replaced |
| Nov 2025 | Denver | Not draining | Replaced the drain pump |
| Oct 2025 | Littleton | Stackable washer stuck | Clogged drain; cleaned it |
| Aug 2025 | Denver | Not draining | Replaced the drain pump assembly |
| May 2025 | Denver area | Drain error | Cleaned the drain pump |
| Mar 2025 | Evergreen | ND error | Replaced the drain pump |
| Jan 2025 | Longmont | Door would not open, noise | Replaced the drain pump |
| Jan 2025 | Brighton | Not working | Replaced the drain pump |

Why the door will not open
A Samsung front-loader keeps the door locked while there is water inside, for safety. If the washer cannot drain, the door stays locked. That is why “the door won’t open” is often a drain problem. On a Longmont call the door would not open and the washer made a noise; the drain pump was replaced and the door released normally.
Clean or replace the pump?
- Clean when the pump runs and the filter or impeller is clogged. A Littleton stackable and a Denver washer drained again after cleaning.
- Replace when the pump hums but does not turn, makes a grinding noise, or does not run at all. That was the case on most of our calls.
- Check the rest while the washer is open: worn shock absorbers (Brighton) or leveling problems make the drum bang and can stop the cycle.

From the technician
“Samsung front-loaders have that little filter behind the bottom panel, and most people never open it. Clean it every couple of months. If you hear the pump hum or grind and the water stays, stop running cycles; a jammed pump burns out.” — Zach, technician at The Appliance Team

Repair cost and booking
Our diagnostic visit is from $59 for homes, and the fee is credited toward the repair if you go ahead. The technician tells you the price before any work starts. We work in 52 Denver-area cities.
- Call 720-230-1229 and tell us the model and the code on the display.
- See our Samsung washer repair page, the Samsung washer error codes, Samsung washer not spinning or the general washer not draining guide.
How to prevent this
Many of these breakdowns start with maintenance that was skipped. These guides show what to check, how often, and what happens if you don't:
Questions we hear on Samsung drain calls
Why is my Samsung washer not draining?
A clogged drain filter or pump, a kinked hose or a failed drain pump. On our calls the drain pump was the most common repair.
What does 5C mean on a Samsung washer?
5C (it can also show as SC or ND on some models) means the washer could not drain in time. Clean the drain filter and check the hose. If it comes back, the drain pump needs to be cleaned or replaced.
Why won’t my Samsung washer door open after the cycle?
The door stays locked while there is water inside. Fix the drain, and the door releases.
Is it worth replacing the drain pump on a Samsung washer?
Usually yes. It is one of the most common washer repairs, and the rest of the washer is often fine. Our technician tells you the price before starting.