On a Samsung gas range, an oven that will not heat almost always has a weak or failed bake igniter: the burners work, but the oven never lights. On a Samsung electric range, it is usually the bake element, the temperature sensor or the control board (relay). In our Denver-area calls the bake igniter was the part we replaced most, followed by control board and wiring repairs. If your oven heats to around 250°F or 325°F and stops climbing, the sensor or the board is the usual suspect.
Samsung ranges, gas and electric, are among the most common ovens we work on in the Denver area. Since January 2024 our technicians have closed more than 25 Samsung oven calls where the oven did not heat, heated slowly or stopped climbing, from Boulder and Wheat Ridge to Thornton, Lafayette and Denver. Here is what to check and what we found.
Checks you can do yourself
- Gas range: watch the bake burner. Take out the bottom panel if your model allows it and start Bake. A healthy igniter glows bright orange and the burner lights within about a minute. If it glows but never lights, the igniter is weak.
- Check the gas. If the cooktop burners light, gas is reaching the range. If nothing lights, check the shutoff valve behind the range.
- Electric range: look at the bake element. A blister, a break or a dark spot on the element means it has failed.
- Check the clock and settings. Make sure Sabbath, Delay Start or Lock is not on, and reset the range at the breaker for a minute.
- Check the breaker on an electric range. A half-tripped double breaker can leave the display working but no heat.

What we found on Samsung oven calls
| Date | City | Problem | What we did |
|---|---|---|---|
| Nov 2026 | Boulder | Oven and cooktop not igniting or heating | Repaired the igniter wire harness |
| Sep 2026 | Wheat Ridge | Oven not heating | Replaced the bake igniter |
| Jun 2026 | Boulder | Oven not turning on | Replaced the bake igniter |
| Mar 2026 | Denver | Oven heats to 250°F and stops | Oven control board needed; the bake relay was sticking |
| Oct 2025 | Thornton | Broken glass top, two elements not working | New cooktop glass, elements and wire harness |
| May 2025 | Wheat Ridge | Oven not heating | Replaced the bake igniter |
| Apr 2025 | Westminster | Oven not heating | Replaced the igniter |
| Feb 2025 | Denver | One cooktop burner not igniting | Replaced the igniter |
| Nov 2024 | Denver | Oven not working | Replaced the igniter |
| Nov 2024 | Boulder | Oven not igniting | Replaced the igniter |
| Sep 2024 | Lafayette | Oven not heating | Replaced the convection element and the relay board |
| Jul 2024 | Thornton | Not heating past 325°F | Replaced the temperature sensor and the bake element |
| Mar 2024 | Boulder | Will not heat above about 175°F | Control board |
Gas ranges: the bake igniter
A Samsung gas oven uses a hot-surface igniter. The gas valve opens only when the igniter draws enough current. As the igniter ages, it still glows, but not hot enough to open the valve, so the oven never lights or takes a very long time. That is why “it glows but doesn’t light” is the classic sign. It was the most common repair on our Samsung oven calls, in Wheat Ridge, Boulder, Westminster and Denver. On one Boulder range the igniters were fine, but the wire harness feeding them had failed.

Oven heats only part way
If the oven starts heating but stops at 175, 250 or 325°F, the problem is usually not the igniter or element. The oven relies on a temperature sensor and on relays on the control board. In Thornton the sensor and bake element were replaced; in Denver a sticking bake relay meant the control board had to be replaced; in Boulder the control board was the cause.

Electric ranges: elements, glass top and wiring
On Samsung electric ranges we replace bake and convection elements, and sometimes the whole glass cooktop. In Thornton a range with a broken glass top and two dead elements got a new top, new elements and a new wire harness. In Lafayette the convection element and the relay board were replaced.

From the technician
“If your Samsung gas oven takes forever to preheat or doesn’t light, it’s almost always the bake igniter. Don’t keep restarting it hoping it catches. If the oven climbs and stops at the same temperature every time, that’s a sensor or a board, and an igniter won’t fix it.” — Zach, technician at The Appliance Team
Repair cost and booking
Our diagnostic visit is from $59 for homes, and the fee is credited toward the repair if you go ahead. The technician tells you the price before any work starts. We work in 52 Denver-area cities.
- Call 720-230-1229 and tell us the model and whether the range is gas or electric.
- See our Samsung oven repair page, the Samsung oven error codes or the general oven not heating guide.
How to prevent this
Many of these breakdowns start with maintenance that was skipped. These guides show what to check, how often, and what happens if you don't:
Questions we hear on Samsung oven calls
Why is my Samsung oven not heating but the stove works?
On a gas range, that almost always means the bake igniter is weak or failed. On an electric range, check the bake element; if it looks fine, the temperature sensor or the control board is the next suspect.
Why does my Samsung oven take so long to preheat?
On gas models, a weak bake igniter is the usual cause. On electric models, a failed bake element leaves only the broil or convection element heating.
Why does my Samsung oven stop heating at a certain temperature?
A faulty temperature sensor or a sticking relay on the control board. We found both on real calls; an igniter or element alone will not fix it.
Is it worth fixing a Samsung oven that won’t heat?
Usually yes. An igniter, element or sensor is a moderate repair. Our technician tells you the price before starting.